Chainrings

- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum

Our Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems. 9-speed drivetrains require a 10-speed chain - For SRAM DM Boost cranks, 3mm offset for a perfect 52mm chainline - For SRAM DM cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics

Our Shimano M9100 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought after Bi Directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics

Our Shimano M9100 Narrow/Wide Oval Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Oval shape allows for greater power, increased traction, and a smoother spin - Highly sought-after bi-directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics

The super-tough Rock Sprocket is built to last. Made from full CNC'd, 6.5mm thick 7075-T6 aluminum for superior strength and 7 half-depth reliefs for a clean look and weight reduction. Featuring offset 1/8" teeth provide improved chain alignment on all setups. - Type: Bolt Drive - Material: 7075-T6 Aluminium - Thickness: 6.5mm - Compatibility: 19mm, 22mm, and 24mm Spindles - Weight: 3.5oz (25T)

The Nathan Williams signature Rewind sprocket! CNC machined 5-spoke design provides both stylish looks and strength, while offset 1/8" teeth provide improved chain alignment on all setups. - Type: Bolt Drive - Material: 100% CNC Machined 7075-T6 Aluminum - Thickness: 6mm - Features: Nathan Williams Signature - Type: Bolt Drive or Spline Drive - Weight: 2.1oz (25T)

The real deal, the Reel full guard sprocket. CNC machined from super thick 7075-T6 aluminum, the Reel sprocket will hold up to sprocket chunks and crank arm grinds while protecting your chain at the same time. Extensive machining not only reduces the weight but adds plenty of crank arm clearance. - Material: 7075-T6 Aluminum - Thickness: 13.8mm Overall (7mm at Spindle) - Type: Bolt Drive - Compatibility: 19mm, 22mm, and 24mm Spindles - Weight: 4.6oz (25T)

This direct mount chainring coincides perfectly with the Afterburner Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Material: Steel - Precision CNC-machined AL7075/T6 - Long tooth profile enhances chain retention - Thick Thin tooth design for maximum chain engagement - SH12: Compatible with Shimano 12s chain

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

- Made of heat treated hard anodized 7075 T6 aluminum - SPEED: 10 /11sp compatible. Shimano 10/11, Campy 10/11, SRAM 10 - Recommended chain: KMC, Shimano, or Campy chain

- Made of heat treated hard anodized 7075 T6 aluminum - SPEED: 10 /11sp compatible. Shimano 10/11, Campy 10/11, SRAM 10 - Recommended chain: KMC, Shimano, or Campy chain

- 10 and 11 speed compatible chainrings - Design and rigidity adapted to ZED 3 cranksets - Ultra light chainrings - Fluid, fast and accurate gear changes - Use chainring pairs for perfect compatibility

- Made of heat treated hard anodized 7075 T6 aluminum - SPEED: 10 /11sp compatible. Shimano 10/11, Campy 10/11, SRAM 10 - Recommended chain: KMC, Shimano, or Campy chain

- Made of anodized and heat treated 7075 T6 aluminum - 10/11 compatible (Shimano 10/11, Campy 10/11, SRAM 10) - Recommended chain: KMC, Shimano or Campagnolo

- 10 and 11 speed compatible chainrings - Design and rigidity adapted to ZED 3 cranksets - Ultra light chainrings - Fluid, fast and accurate gear changes - Use chainring pairs for perfect compatibility

- 10 and 11 speed compatible chainrings - Design and rigidity adapted to ZED 3 cranksets - Ultra light chainrings - Fluid, fast and accurate gear changes - Use chainring pairs for perfect compatibility

The HalfBash sprocket features a lightweight plastic (replaceable) bash guard to protect your setup. You can run 1 guard, 2 guards* or no guards at all. Features: - 7075-T6 Aluminum Sprocket - Replaceable Plastic Bash Guard - 25t & 28t *bolts for 2nd guard set up sold separately

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings. - Compatible with 9, 10, 11, and 12-speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing

The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last. Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. - Compatible with 9, 10, 11, and 12 speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing

12 Good Reasons If you're looking for a bomber new chainring that can run with your Shimano 12 speed drivetrain, then look no further. This direct mount ring has the versatility of RF CINCH integration and the stiffness to turn all your "push" into straight-up "go". Built to Last Created from 4mm-thick 7075-T6 alloy plate for big-time stiffness and strength. Its NW tooth profile is Shimano 12-speed specific and provides secure chain retention All-Round Performer The Race Face CINCH interface makes this direct mount chainring fast and easy to swap for different sizes to customize your Shimano 12-speed drivetrain. - Compatible with Cinch Direct Mount Cranks - 7075 Aluminum - Direct Mount

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

64BCD chainring for MTB cranksets

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Chainring bolts not included

The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Drivetrain Speeds: 10 , 11 - Material: Steel - Ring Position/Type: Single - Weight: 110 grams (32t), 96 grams (30t),

Replace worn-out chainrings or change out gearing with SRAM's Yaw Compatible Inner Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. This chainring works for SRAM's Yaw front derailleurs on both 10- and 11-speed drivetrains. The 42-tooth version works best when paired with a 55- or 54-tooth big ring.

A tight and consistent 13-tooth gap between chainrings delivers accurate and dependable shifting and is the core of our X-Range gearing. Our smaller chainrings paired with wide-range, 10t-start cassettes provide more efficiency and more time in the big ring. It's modern gearing for today's riders. - Crisp and accurate front shifts - Durable finish - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear

Rugged durability comes naturally to the Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. Available in three different tooth counts, there is ample room to refine and customize your bike’s feel. - 8 Bolt direct mount - 30-38T range and +3mm offset variants - Compatible with T-Type chains