All Products

- D-shaped composite construction. - Provides better "pushing" compliance for a smoother ride quality. - Provides better "pulling" stiffness for cornering, sprinting and climbing efficiency. - Drop 125mm. - Reach: 72mm. - Backsweep: 5 degree. - 8 degree flare.

Give 'em your worst Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you with category-leading Trail to Enduro good times with a 30mm-wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability. Rough And Rowdy Made to handle all kinds of Enduro and all-mountain punishment, the burly Aeffect R rim sports a 30mm inner width and is born tubeless ready. Balance is Key Aeffect R sports a stout, 6069 alloy rim with a 4.5mm-offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life. No Frills, All Thrills The new Trace hub doesn't need flash or gimmicks. Highlights include: durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.

Built with a lightweight aluminum frame, plenty of stand-over clearance, and easy-to-use gears, this is the rigid version (no front suspension) of the XtC Jr. family. With 24-inch wheels and smooth-rolling tires that can handle the trail, it's a fun and stable way to get started on the trail. Lightweight frame ALUXX-grade aluminum frame provides a lightweight, purpose-built chassis for aspiring young off-road riders. Confidence and control Size-specific wheels give young riders the performance they need for true off-road riding. Kid-friendly features Youth-specific performance components help young riders improve their off-road skills.

LIGHTWEIGHT AND EASY TO MANEUVER, THE ENCHANT PUTS HER ON A PATH TO ADVENTURE. KEY PERFORMANCE FACTORS Accessible The low stand-over height and reliable disc brakes give her control over the bike for a safe and consistent ride. Empowering Off-road tires create traction and soak up small bumps for a smoother ride on dirt or sidewalks. Comfort and Control A comfortable, lightweight ALUXX-Grade Aluminum frame design with an upright riding position and twist shifters inspire girls to learn to mountain bike.

This one takes all your trail dreams, from XC to enduro, all the way to eleven. SRAM's XX1 rear derailleur packs a massive amount of technology into its compact, lightweight body. It uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.

The SRAM Force eTap AXS front derailleur is AXS enabled for easy personalization. The redesigned derailleur offers better rear-tire clearance—for those that explore all roads—and works perfectly with all chainring combinations. No compromises; never miss a shift. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new chainring combinations - Compatible with existing eTap batteries

Replacement Hydraulic lever only. Does not include rubber hood or brake caliper. Includes 2000mm hose and fittings - Drivetrain Speeds: 11 - Brake Lever Actuation: Hydraulic - Shifter/Derailleur Compatibility: SRAM 11 - Cassette Spacing: Shimano/SRAM 11 - Adjustable Reach: Yes - Brake Lever Actuation: Hydraulic - Rear Der/Shifter Compatibility: SRAM Exact Actuation

Cyclocross, adventure, or road—whatever your pursuit, the Force 1 HRD brake lever features our HydroR design, with superb ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. Features - Lever body design offers improved finger wrap and improved comfort and control - Internals feature easy access to bleed ports - Master cylinder design featuring optimized pistons and seals for power and control - Flat mount caliper - Left-side lever

SRAM's Force 1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between rider and bike and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side rear hydraulic-brake carbon lever has the same shape and feel as the Force 1 right lever, but has no shift paddle. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The brakes themselves provide incredible modulation and stopping power. You'll never go back to rim brakes again! - The moto-style set up allows you to hook up your left brake lever to your rear wheel. - Carbon fiber lever blade - Bleed port is easily accessed

SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

The Reynolds FX2 Freecoaster wheel features the Garrett Reynolds signature rim laced to the updated Cinema FX2 freecoaster hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples providing superior strength. This wheel comes standard with a rim strip and both Cinema CR and DR nylon hub guards and keeps Garrett rolling smooth regardless of what he throws at it.

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position. The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before. The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base. With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you. - Titanium rails. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Approximate weight: 251g (Size 155mm) - Approximate weight: 245g (Size 143mm)

The Romin EVO Pro with Mirror starts with our Body Geometry methodology and combines this with our game-changing Mirror saddle technology to create an unmatched combination of performance and comfort. The saddle is designed for riders that prefer an agressive, performance inspired position that still protects soft tissue and blood flow. The result? 26% less pressure, right where it counts. PERFORMANCE MEETS COMFORT: The new Romin EVO Pro with Mirror saddle uses the exact same 3D printed pad as the S-Works Romin EVO Pro with Mirror but now comes with a nylon and reclaimed carbon fiber shell and hollow Ti rails. Our Romin EVO has been a favorite for our professional athletes and racers everywhere season after season. Its traditional long shape is designed to relieve pressure in aggressive, race-inspired positions while allowing the rider to slide backward and forward on the saddle to provide the ideal position for tempo climbing or maximum wattage efforts. Now with Mirror technology, the saddle reduces pressure by up to 26% compared to traditional foam saddles, validated with extensive high-resolution pressure mapping studies. It uses a 3D printed matrix with 22,200 struts and 10,700 nodes and features a unique concave shell to deliver our thickest Mirror pad yet. To ensure your fit is dialed, it comes in two widths: 155mm and 143mm. BODY GEOMETRY AND MIRROR: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pain, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don’t just promise to solve these issues for men and women — we’ve proved they do. Unlike traditional single-density foam, Mirror technology allows for infinite density tuning with a single material. But any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retül data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. DURABILITY AND SUSTAINABILITY: By using reclaimed carbon fiber in the shell, we’re keeping scrap carbon fiber out of landfills while creating a light and durable saddle. Add to this hollow Ti rails, and you’ve got a saddle light enough for performance road and XC riding - just 243 grams in a 143 mm width — and tough enough for gravel and trail riding. - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology pad features 22,200 struts and 10,700 nodes, all individually tuned. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Size 143mm / Weight: 239g - Size 155mm / Weight: 245g

The Specialized S-Works Power Arc saddle expands on the success of the original S-Works Power saddle, while featuring the same channel and length as the original. This means that it features a stiff, FACT carbon fiber shell and rails and lightweight EVA padding. The shape of the saddle is also designed to provide ample sit bone support, and this has been coupled with a shorter-than-usual nose section to keep pressure off of soft tissue while riding in aggressive positions. They even took this ideology a step further via an extra wide and elongated Body Geometry channel that's been proven through blood flow testing and pressure mapping to reduce numbness and pressure on unwanted areas. And while this all seems familiar if you're already a Power loyalist, this iteration features a curved Body Geometry shape that better contours to your body. What does this mean for your ride? It means that you'll feel as if you're “in the saddle," not on it. And ultimately, this equates to greater comfort and superior performance in all seated positions, whether you're a man or woman. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries. - Stiff FACT carbon fiber shell is tuned for support and ride compliance. - Super-light EVA padding for comfort and support on longer rides. - Ultra-light, strong, and oversized FACT carbon rails. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight: 141g - Size 155mm / Weight: 145g

Specialized's ultra-light S-Works Power saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff FACT carbon fiber shell tuned for support and ride compliance - Super-light PU padding for comfort and support on longer rides - Ultra-light and strong oversized FACT carbon rails - Tough, light and water-resistant cover - Level 1 padding: Lightest level of padding; most direct connection to the bike - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Weight: 143g (143mm), 155g (155mm)

Keep it low and aero without sacrificing comfort. The carbon-railed, ultra lightweight Specialized S-Works Romin EVO is a high-performance road saddle that's contoured to put you in a position for optimal power transfer and comfort as you put pressure on your competition. The Body Geometry channel is designed to maximize blood flow, while the saddle allows you to maintain comfort easily, even while in a competitive, more aerodynamic position. And when you add in a FACT carbon fiber shell, the medium density Level 2 padding, oversized carbon rails, you have a saddle that's ready for anything. - Patented Body Geometry design is lab tested to assure blood flow to sensitive arteries. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light and strong, oversized FACT carbon rails. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - Size 143mm / Weight 134g - Size 155mm / Weight 137g - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

- Lightweight carbon shell - 23 large freeflow vents with internal channels for maximum cooling - Energy absorbsion and slip plane technology - Crash release visor system (CRV) - Easy position visor, no bolts needed - Removable liner for easy washing - Injection moulded branded trim to protect carbon helmet shell - Agion Bluesign approved antimicrobial treatment - Fidlock magnetic closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 55 – 56cm - Medium = 57 – 58cm - Large: 59 – 60cm - X-Large: 61 – 62cm - XX-Large: 63 – 64cm

OWN THE FIELD. Maximize your efforts as you drop the hammer. Power up the steepest, most technical climbs. Maintain stability and control as you unclip to cross a sketchy obstacle. Featuring a rubber-protected, 100% carbon, dual ExoBeam outsole combined with an all-new internal ExoWrap with dedicated BOA, the Charge Pro mountain bike shoe delivers the pinnacle of lightweight XC, CX and gravel performance. FEATURES - A 100% long-fiber carbon ExoBeam plate featuring a full rubber-covered dual-beam design, offers secure mid-foot contact on the pedal while un-clipped, without sacrificing torsional flexibility, stiffness, or power transfer - Reinforced high-density, water-resistant PU upper with laser-cut micro-perforations combines optimal support with extremely low weight while providing optimal ventilation and promoting a balanced foot climate - Unique fully internal, direct pull ExoWrap with dedicated Boa IP1 dial produces a 360° foot enclosure for customizable arch fit and support - Exclusive Slip-Last construction allows the forefoot to be stiff while enabling torsional ration of the rear and midfoot - Reversed forefoot strap ensures maximum comfort and a secure fit - Ultra grippy SharkSkin heel liner gives a secure, slip-free fit even under the harshest conditions - Molded TPU toe guard protects forefoot and features double secure cleat inserts - Removable sock liner with tunable arch support and TransTextura Plus antimicrobial layer promotes a balanced foot climate - Weight: 338g (size 45)

COMPACT, LIGHT & COMFORTABLE The all-new Contact SLR handlebar is a full carbon handlebar with updated ergonomic shaping and revised compact geometry that provides maximum compliance and superior handling at a feather-light weight. FEATURES - Short reach and shallow drop for instant transition from the tops, to the hoods to the drops - Easy-to-grip elliptical drops boost bar stiffness without adding weight - A wider, curved top section adds vertical compliance and delivers a smooth ride - Purpose-designed ergonomic shaping of the top of the bar provides maximum hand comfort and support for long rides

Specialized sums up their S-Works 6 road shoes in two simple phrases: explosive speed and superior comfort. The S-Works 6 is Specialized's stiffest and most efficient shoe ever. Combine that with a Body Geometry sole and footbed that optimizes hip, knee, and foot alignment, the Padlock heel system that locks your feet into the shoes, and independent Boa closures for a custom, on-the-fly fit, and you have one incredibly comfortable, efficient pair of shoes. Asymmetrical titanium cleat bolts rotate to allow for even more flexibility and range for cleat positioning, while replaceable heel treads increase shoe longevity. Plus, strategically placed no-stretch fabric improves your efficiency and connection to the bike.

Take your ride inside with Tacx Boost. You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. Resistance can be controlled with a lever on the handlebar. The setup is easy—with just two simple clicks you mount your bike and you are ready to ride. The Boost bundle includes a speed sensor so you can track how far and how fast you're riding indoors and train with your favorite app. SIMPLE SETUP With just two simple clicks, you'll be ready to ride. SMALL BUT STABLE This indoor trainer has a small footprint, 675 x 650 mm (26.6" x 25.6"), but provides a sturdy ride. EASY TO STORE Multifunctional front wheel support serves as a handle to carry the trainer and ensures a natural cycling position. MAGNETIC BRAKE You won't need external power to use this trainer, thanks to a forceful magnetic brake that allows you to directly apply resistance or lighten it. RESISTANCE CONTROL A simple lever on your handlebar lets you control the resistance; 10 levels, up to 1,050 watts. REALISTIC RIDE FEEL An actual flywheel generates a realistic and smooth pedal stroke. SMOOTH AND QUIET The closed resistance unit reduces noise and makes for a smoother ride. FEATURES - Type of trainer: Basic Smart trainer with magnetic brake - Virtual Power: Virtual Power - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Road, Tri, & MTB with skewer quick release - Supplied with: Front wheel support, quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 1050 Watt - Simulation of descent: No - Max. torque: 17 Nm - Max. brake force: 50 N - Flywheel: Actual of 1.6 kg - Mass inertia: 9.18 kg (20.2 lbs) - Footprint (LxW): 675 x 650 mm (26.6 x 25.6 in) - Height: 410 mm (16.1 in) - Dimensions when folded: 565 x 410 x 245 mm (22.2 x 16.1 x 9.65 in) - Weight: 8.53 kg (18.8 lbs) DATA OUTPUT AND CONTROL - Wireless communication: ANT+ & Bluetooth - Control by: Handlebar resistance lever with 10 positions - Output: Speed - Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet - Trainer Type: Basic, Manual, Wheel-on, Wheel-on - Features: Smooth ride feel, Silent, Powerful, Manual resistance control, Enables virtual power, Handlebar lever, Dual material roll, Resistance roll 30 mm, Actual flywheel, Foldable, Easy to carry, Easy to set-up, Suitable for power workouts, Suitable for interval training - Positions: 10 - Suitable axles: Width of rear fork: Road 130 mm, MTB 135 mm. Adapters for other widths available

High-quality combination ratchet wrench set by Wera. The new generation of combination ratchet wrenches, suitable for hexagon bolt heads or nuts. Comes with a holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. - Practical holding function thanks to the metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size

- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware - Remote Position: On handlebar - Cable Routing: Internal - Offset: 0mm - Clamp Type: Standard, double bolt - Seat Post Material: Aluminum - Seat Post Weight: 510g

Take to the open road with the lightest, most durable, best-handling alloy wheel Roval has ever made - the Alpinist SLX. This is the pinnacle of alloy - a wheel so good it earned the Alpinist name. There’s no room for excess weight whether you’re chasing summits or looking for ride quality. For the climbers, the wheels are stiff enough for high-powered efforts and feature confident handling. The newly engineered shot peen treatment increases fatigue life and with proven DT Swiss 350 hubs and Sapim spokes, the overall weight has been reduced by 30 grams. Because every gram counts. LIGHTWEIGHT X RIDE QUALITY: As the first-ever alloy product to earn the Alpinist name, the Roval Alpinist SLX wheels weigh in at 1,485 grams* thanks to premium alloy and a thoughtful build. Confirming what we’ve all felt: lightweight wheels feel better to ride. *1,485 grams production sample weight. Final weights may vary slightly. TUBELESS COMPATIBLE: There’s no room for excess weight whether you’re chasing summits or looking for ride quality. A Shallow rim depth amplified by tubeless compatibility means you’ll get sublime ride quality with the added efficiency, comfort, and flat protection of tubeless tires. RELIABLE PERFORMANCE: Featuring confident handling for high-powered efforts, the newly engineered shot peen treatment increases fatigue life, while the proven DT Swiss 350 hubs and Sapim spokes enhance overall durability and performance. - Rim: Alpinist Alloy, 6061 Alloy Shot-Pened, 700c, Disc Brake, Tubeless Compatible - Rim Details: 24mm Depth, 23.5mm External Width, 20mm Internal Width - Hub: DT Swiss 350 Straighpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub (Convertible freehub) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 296mm, NDS: 292mm, Rear: Two-cross (1:1) 24 count, DS: 291mm NDS: 295mm - Nipple: Sapim Secure Lock Double Square Alloy Blk, 2.0 x 18mm, 16cNm - Max Pressure: 130psi - Weight: Wheelset 1,485g, Front 694g, Rear 791g (excluding 15g, tubeless rim tape, and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

The most advanced aluminum crankset SRAM has ever made, the X0 Eagle T-Type Wide crankset is utterly unique and simply striking. Bringing serious riders the exact sort of legitimate performance X0 stands for, courtesy of a ground-breaking all-aluminum design with a perfectly balanced stiffness to weight ratio. - Unique, ground-breaking design and one of the lightest aluminum cranksets on the market - All-aluminum design provides perfect stiffness to weight ratio - Includes X0 T-Type removable and replaceable 2-Guard aluminum bashguard to protect your chainring when riding rough terrain - 55mm Chainline - 174mm Q-factor - DUB bottom bracket and spacers NOT included

GTO marks the pinnacle of the Total Comfort MILLE GT line - spiritual successor to the iconic CENTO and Campionissimo Bib Shorts. It features the plushest, most responsive and breathable ASSOS insert to date, wrapped in our new frictionless, wrinkle-free paneling. The GTO has two leg lengths: STANDARD and LONG (+3cm vs standard). BEHIND THE PRODUCT With large-muscle support, friction, and excessive pressure remaining critical issues on long-duration rides, GTO destroys conventional bib short construction formulas. We reversed stitch lines and radically reshaped the insert to eliminate friction and genital pressure, while providing matchless muscle support with tapered, wrinkle-free leg panels that mirror your personal physique.

Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.