Parts & Accessories
These GORE WINDSTOPPER overshoes with PrimaLoft insulation are for the coldest days. A full-length zip ensures you can get them on and off easily, while the flexible material and carefully contoured design will not hinder your pedal stroke. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Insulation Protection: Integrated low-bulk insulation maximizes warmth while maintaining mobility - Zip tags for easy opening - Heel pull tab for easy on and off - Abrasion resistant material at sole and toes - Elastic cuffs - Adjustable Velcro strap on sole for perfect fit - Reflective details
Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back Velcro width adjustment
The utilization of GORE WINDSTOPPER material on these overshoes provides a low bulk solution to keep your feet warm. The flexible and breathable WINDSTOPPER material will fit snuggly to your shoes to prevent flapping and maximize moisture management. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Thermo lining: Increases warmth; brushed and soft back for next-to-skin comfort - Reflective logo and piping - Fully taped seams for increased protection - Zipper closure
Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
For a little extra protection in the cold for your toes, slip on a pair of the Element Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Fabric Content: MAIN: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; TOE & HEEL: 100% Polyester
These lightweight and low bulk overshoes are a great compromise when you need to keep your feet warm, but don't want to restrict pedaling movement. Completely windproof, you'll instantly feel more comfortable on every training ride in the wind. - Reflective logo on side - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Elastic cuffs - Reflective piping on back - Elastic back for maximum comfort and fit
Mother Nature is always in flux, but mankind is both smart and adaptable. In other words, whenever she changes her mood, we always have the right tool for the job. And when that job is protecting against blustery, cold conditions, the right tool is our Deflect Comp Shoe Covers. Compared to our Element line of shoe covers, Deflect places more of a focus on wind resistance, so you'll find a stretchable construction with lightweight insulating properties. And to make getting in and out of the covers easy, we also included a rear zipper. - Deflect fabrics feature a good amount of stretch and a brushed back interior to ensure a light level of insulation. - Abrasion-resistant bottom and toe panels increase the lifespan. - A universal cleat opening makes these covers compatible with either road or mountain shoes. - Reflective elements - Rear Velcro closure
S2-Snap BOA cartridge assembly kit for personalizing your shoes. Includes: One left cartridge dial assembly, one right cartridge dial assembly, two laces. Compatible with the following models: - S-Works Road - S-Works XC - Women’s S-Works XC - Pro XC - Women’s Cascade - Rime Expert - Comp MTB - Women’s Motodiva
- Hyper Green and Black is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibilty to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.
Your S-Works MTB shoes thanklessly accompany you through nature's muddiest, toughest conditions, so thank them and keep them ticking with Specialized's Replacement S-Works Mountain Shoe Lug Kit. These lugs replace the worn-out tread on your S-Works Mountain shoes. - Includes heel, ball, and toe pieces - Includes toe spikes - Sold in pairs; includes screws
Depending on where you live and ride, full shoe covers might be a little too aggressive for the conditions at hand. That isn't to say that it isn't cold, though—you just might be better suited with something like Specialized Element Windstopper Toe Covers, instead. These toe covers feature a Gore Windstopper Soft Shell construction that ensures superior levels of breathable insulation, plus reliable resistance to both wind and water. The result? Warmth and protection right where you need it, without running the risk of overheating. - Gore Windstopper Soft Shell provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Small/Medium: sizes 38 – 43 - Large/X-Large: sizes 44 – 48
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
$30.00 - $40.00
Improve traction in the worst conditions with aggressive toe studs. Ideal for CX racing or Mountain riding in snow, ice, mud or even just hard pack dirt. - 15mm length is longer than standard - Durable stainless steel is engineered for long-lasting wear - Precision threads are compatible with most off-road cycling shoes. - Original equipment for some S-Works XC. - Packaged as 5pc, so you have a spare.
There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left
Want one shoe piece to cover the entire road or mountain biking season? The Neo Protect 3 Shoe Cover is the one for you! Extremely durable, warm, and has easy adjustments with very wide side hook-and-loop fasteners with large locking zippers for easy use, this shoe cover is the only one you'll need all season long. It provides 360 degrees of reflectivity for added visibility in low light conditions, a reinforced Kevlar track under the foot with Hypalon rubber for long term walkability, and provides all-season wind and water resistance. - Cuff: Bias - Under Sole: 2 openings for road and SPD cleats - Side opening: Seam-sealed hook and loop fastener for easy slip-on - Visibility Features: Reflective - Fabric: 2 MM NEOPRENE – Isolates from cold, provides warmth
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws
Your S-Works Road shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works Road shoes. - Fits 2013 and 2014 S-Works Road shoes - Heel lug only - Sold in pairs; includes screws
Replacement ratchet strap for all shoes with SL buckle closure. - Sold in pairs - 2011 D-Link replacement straps: Used on 2011-12 Pro Road and 2011-12 Pro MTB shoes with no screw attachment. - 2011 D-Link replacement straps. Used on Pro road and MTB shoes for 2011 - 2009 X-Link replacement straps: Used on 2009-10 Pro Road and 2009-10 Pro MTB shoes with Phillips head screw attachment. - 2009 X-Link replacement straps. Used on Pro road and MTB shoes from 2009 and 2010
Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection
Stripped, worn-out—whatever happened to your three-hole cleat attachment is between you and your shoes…or maybe between your shoes and your cleats. Either way, Specialized has a T-Nut replacement kit that's easy to install and even easier than buying a new pair of shoes.
Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.
Page 1 of 1