Pedals

Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 320g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

- Carbon body and new design creates a more powerful structure to transfer power from the cyclist to the road. - Power transfer and stability are also improved with a larger pedal surface area of 725mm - The ICLIC system has been redesigned to allow for a more positive engagement and to be more comfortable. - Watt-saving CeramicSpeed bearings and super-light hollow titanium spindle - 87.3 grams per pedal - The carbon blade is also adjustable in 3 positions to optimize engagement tension. - Maximum rider weight of 90kg. Specs: - Pedal Material: Carbon - Pedal Weight: 87g - Cleat Compatibility: ICLIC - Spindle Material: Titanium - Pedal Bearing: Ceramic - Pedals Thread: 9/16"

The KEO BLADE CARBON CERAMIC Ti pedal is the flagship model of LOOK's road pedal range. They feature a carbon body with the carbon blade technology which bears its name, titanium spindle and ceramic bearings creating a pedal of incomparable weight and impressive aerodynamics. These pedals are designed to win. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 16 + additional 12 in box, 20 sold separately - Body: Carbon - Blade: Carbon - Spindle: Titanium - Bearings: Ceramic - Platform area: 700mm² - Platform width: 57mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5 + 6.3mm) - Weight (pedal): 95g - Weight (pair + cleats): 260g

Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally RS, Rally RK or Vector™ 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch.

- Titanium axle and carbon body. - Tension adjustment to fine-tune how the pedal functions - Easy and consistent engagement and an open design that clears debris each time you step in. Specs: - Pedal Material: Carbon - Pedal Weight: 124g - Cleat Compatibility: ATAC - Spindle Material: Titanium - Pedal Bearing: Ball bearings - Pedals Thread: 9/16''

- Carbon body and titanium axle. - Power transfer and stability are maximized with a large, 725mm surface area. - Bottom fairing to improve aerodynamics and protect the carbon blade. - TIME's patented preopened ICLIC system allows for fast and easy cleat engagement. - Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. - Maximum rider weight of 90kg. Specs: - Pedal Material: Carbon - Pedal Weight: 94g - Cleat Compatibility: ICLIC - Spindle Material: Titanium - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

- Developed for the demands of professional Enduro racing, the SPECIALE 12 is made of a 6106-T6 aluminum - A wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system combine to exceed the demands of the most advanced riders. - TIME's renowned engagement system allows easy engagement with a positive, predictable entry and release, as well as a design that self-cleans even in the most difficult conditions.

- Excellent Pedaling Efficiency - Optimized Balance Of Weight And Rigidity - Injection Molded Carbon Composite Body - Hollow Cleat Bolt - Efficient Power Transfer - High Stability - Extra-Wide Platform - Efficient Power Transfer/Durability - Reduces Flex And Pedal Body Wear - Stainless Steel Body Plate - Excellent Pedaling Efficiency - Smooth Rotation - 2-Ball Bearing, 1-Wide Roller Bushing - Reliable Durability Performance - Stable And Uniform Load Distribution - Wide Bearing Placement - Rider Tune - Customize The Entry And Release Tension Settings - Adjustable Entry And Release Tension Settings - Shimano 3-Year Limited Warranty - Average Weight: 224g - Shimano SPD-SL cleats included - Standard (52mm) - Wide (56mm)

The ceramic bearing and famous BLADE technology transfers 100% of your power input to the drivetrain, making the KEO BLADE CARBON CERAMIC pedals a great choice. With the wide, 700mm² contact area, your foot will become one with the pedal, as you become one with your bike. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 12 + additional 16 in box, 20 sold separately - Body: Carbon - Blade: Carbon - Spindle: Chromoly+ - Bearings: Ceramic - Platform area: 700m² - Platform width: 57mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5mm + 6.3mm) - Weight (pedal): 110g - Weight: (pair + cleats): 290g

The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Carbon - Spindle: Titanium - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 145g - Weight (pair + cleats): 340g - Float angle: 6° - Release angle: 13°

- Allows a customer to convert any Rally 100 or 200 product over to RK/RS/XC pedal body styles.

Bring power to every ride, on- or off-road. If you already own a compatible Garmin pedal-based power meter (Rally XC, Rally RK or Vector 3), use this conversion kit to easily swap your power sensor to new pedal bodies for use on another bike. This kit contains all the components you need to make the switch. NOTE: This product contains pedal bodies only, spindles and electronics are not included. In the box: - Left and right pedal bodies (SHIMANO SPD-SL style) - Replacement seals - 55 mm Q-factor washers - Battery doors

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!

- Power transfer and stability are maximized with a large, 725mm2 surface area. - Bottom fairing to improve aerodynamics and protect the carbon blade. - TIME's patented preopened ICLIC system allows for fast and easy cleat engagement. - Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. - Hollow, stainless steel axle. Specs: - Pedal Material: Carbon - Pedal Weight: 113g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement. - Super slick, patent pending, spindle design - Super low-profile design; 10mm thickness at center - Custom undercut pins provide “clip in” style grip and easy removal - Pedal body carriers 4 hidden pins for easy replacement of broken pins - Tapered outside pedal edge for maximum grip and ground clearance - Large foot platform for modern day DH, 110x108mm

KEO BLADE CARBON pedals feature a Chromoly+ axle and stainless steel bearings for extreme reliability. Beyond its weight, the surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to take it to the next level. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 8 + additional 12 in box - Body: Carbon - Blade: Composite - Spindle: Chromoly+ - Bearings: Steel - Platform area: 700mm² - Platform width: 67mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5 + 6.3mm) - Weight (pedal): 115g - Weight (pair + cleats): 300g

Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Aluminum - Traction: 8 traction pins - Spindle: Chromoly+ - Platform width: 83mm - Weight (pedal): 247g - Weight (pair + cleats): 550g - Light included: Yes (x2) - Light modes: 3 (steady/flash/flash eco) - Battery Life: Up to 30h (flash eco) - Light Output: 15 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 50 min - Beam angle: 180°

TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

- Enhanced pedal-to-shoe contact area with mud-shedding profile - Wide bearing placement for rigidity and uniform load distribution - Slimmer, weight-optimized axle with 2 length options - Low platform height for pedaling stability - Lightweight, 310 g (11 oz.) per pair - Slimmer axle housing better sheds mud and debris - Binding Dual Sided - Cartridge axle - SM-SH51 Cleat included - Cleat retention adjuster - Offset binding - Sealed mechanism - Average weight: 310g (Short axle type) - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD) - 3 mm shorter axle version (52mm) - 1.0 mm cleat spacer included

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

What a statement the TMAC pedal has become! A beautiful marriage between rider feedback and designer experience, the TMAC Signature Tyler McCaul Pedal truly is “Your Dream Pedal”. With over two years of development, including multiple molds, prototypes and months of real world testing, the proof is in the end result. One of the most concave designs on the market today, the control and contact delivered by the TMAC pedal is unmatched. Rated as one of the top 2 best pedals on the market by VitalMTB with countless rave reviews and endless rider testimonials, we are incredibly proud to prove that rider feedback, dedication to perfection and the freedom to take a risk are the recipe for brilliance! Not only does the TMAC pedal give you precise control, but with a non-offset design you have more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design allowed us to make a pedal that feels like the largest pedal ever made at a mere 110mm x 105mm footprint. The machining detail alone makes this pedal a work of art and we guaranty you’ll be blown away with the feel and performance of these pedals… These truly are “Your Dream Pedal”! VITAL MTB REVIEW - 4.5/5

- Aluminum body that is slightly more compact than the SPECIALE 12, yet it offers a stable platform and four adjustable pins for optimal grip. - The micro-adjustable tension clamping system allows riders to fine-tune the pedal function for their preferred riding style. - TIME's patented clamping system allows for easy entry and positive, predictable release, as well as a self-cleaning design to ensure reliable performance in all conditions. Specs: - Pedal Material: Aluminum - Pedal Weight: 196g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.

With LOOK Activ Grip by Vibram and LOOK Vision In Lighting our Geo City Vision Grip is the ultimate urban pedal. Combining 24/7 LED safety, iconic mountain boot traction and MTB-toughness with Tour de France winning performance and unmatched personality, there’s no better place to put your feet for town and country riding. - Technology: Flat pedals + LOOK Activ Grip by Vibram - Body: Composite - Traction: Vulcanized Rubber Activ Grip - Spindle: Chromoly+ - Surface area: 107x103mm - Weight (pedal): 290g - Weight (pair): 580g - Waterproofness: IPX 7 Waterproof rating - Light included: Yes (x4) - Light modes: 4 (steady/day flash/night flash/flash eco) - Battery Life: Up to 20h (flash eco) - Auto stop/start system - Light output: From 6 to 50 lumens - Battery: Micro USB rechargeable (cable included) - Charging time: 2h - Beam angle: 180°

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

- The lightness of a carbon body with the durability of a hollow steel axle, as well as tension adjustment. - TIME's exclusive easy of entry and open design automatically clears debris each time you step in, which ensures that the pedal functions consistently in all conditions. Specs: - Pedal Material: Carbon - Pedal Weight: 143g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"