Filter By:

  • Show More Brands
  • Show Fewer Brands

Bars

Apex Bol Standard Bar
$129.99 - $139.99
The new Apex Pro Bol bars are typical of what Apex Pro stands for - high quality, pro-targeted products, with a little bit of style thrown in for good measure. They are good enough, in fact, to be named after Apex team rider Jess Boland. The size of these bars are what appeals to most people...a moderate 560mm wide (22" in old money) and 580mm high (23"). Because the bars don't have a slit in them, they will sit up really high when used with SCS compression, as there is no need to shorten them to remove a slit. This means their true height is more like 600mm when compared to other bars when sitting in SCS. The style is simple - a basic T-bar with a slight dip in the top bars either side of the upright. The result is a comfortable and strong bar that is set up perfectly for SCS compression. If you don't run SCS, you can still use these bars, but a slit is required to be cut in them. You can do this yourself, or get us to do it for a small fee. The Apex Pro Bol bars are made from high quality chromoly, and professionally powder-coated to provide the ultimate in paint protection. 4130 Chromoly steel Tig welded, CNC bent & notched Powder coated / chromed for high scratch resistance 560mm Wide (22") 580mm High (23") 31.75mm Diameter Designed for SCS (no slit) Threaded systems: Slit will need to be cut
BarWraps Geometric - Black / Gold
$19.99
Customize your bars with Jessica Boland's BarWraps. It has taken more than two years of development for BarWraps to create the perfect DIY wrap for scooter bars. Made from fine cotton, and using a patent-pending re-applicable adhesive, these BarWraps are a must have for every scooter. Applying a BarWrap is as easy as applying grip tape. No expertise is required at all. The team at To Wheels have been blown away by how easy it is to wrap bars with BarWraps...it takes between 10 and 25 minutes to wrap your bars, and because of the re-applicable glue, you don't have to get it perfect first time. Super sticky adhesive-backed cotton, designed and tested over two years to produce a mind-blowing material that can be cut, stretched, repositioned and removed with no fuss and no mess! One pack will fit ANY scooter bars. Developed and Endorsed by the original BarWrapper, Jessica Boland. ** Bars not included in purchase - for illustration purposes only **
BarWraps Leopard Pattern - Naturel
$19.99
Customize your bars with Jessica Boland's BarWraps. It has taken more than two years of development for BarWraps to create the perfect DIY wrap for scooter bars. Made from fine cotton, and using a patent-pending re-applicable adhesive, these BarWraps are a must have for every scooter. Applying a BarWrap is as easy as applying grip tape. No expertise is required at all. The team at To Wheels have been blown away by how easy it is to wrap bars with BarWraps...it takes between 10 and 25 minutes to wrap your bars, and because of the re-applicable glue, you don't have to get it perfect first time. Super sticky adhesive-backed cotton, designed and tested over two years to produce a mind-blowing material that can be cut, stretched, repositioned and removed with no fuss and no mess! One pack will fit ANY scooter bars. Developed and Endorsed by the original BarWrapper, Jessica Boland.
BarWraps Paisley - Purple / Gold
$19.99
Customize your bars with Jessica Boland's BarWraps. It has taken more than two years of development for BarWraps to create the perfect DIY wrap for scooter bars. Made from fine cotton, and using a patent-pending re-applicable adhesive, these BarWraps are a must have for every scooter. Applying a BarWrap is as easy as applying griptape. No expertise is required at all. The team at Towheels have been blown away by how easy it is to wrap bars with BarWraps...it takes between 10 and 25 minutes to wrap your bars, and because of the re-applicable glue, you don't have to get it perfect first time. Super sticky adhesive-backed cotton, designed and tested over two years to produce a mind-blowing material that can be cut, stretched, repositioned and removed with no fuss and no mess! One pack will fit ANY scooter bars. Developed and Endorsed by the original BarWrapper, Jessica Boland.
Envy Thermal Cro-Mo Bars
$109.99
Envy Thermal T-Bars are a standard steel scooter bar with a standard 1 1/4 inch outer diameter and a 1 1/8 inch inner diameter. . Steel scooter bars are heavier than aluminum scooter bars but are much stronger and can handle the stresses put on them by a pro rider landing big air tricks. Made by a high-end manufacturer like Envy Scooters, you can be sure you will be pleased with both the quality and price point of these scooter bars. **Standard bars without a slit are compatible with SCS as is. For IHC a slit must be installed. Not compatible with HIC.**
Envy Reaper Bar V3
$129.99
Not only are the Envy Reaper bars the most popular aluminum bar in the scooter world, but they also are some of the most reliable bars you can get. The V3's are made from a denser Aluminum, which only increases the strength and life time of the bar. If you add these to a brand new custom or a scooter you already have that you're looking to upgrade, you definitely wont regret picking a set of these guys up! Aluminum bars with a slit are compatible with IHC as is (oversized clamp needed). Compatible with full size SCS if the slit is removed. (NOT COMPATIBLE WITH HIC COMPRESSION) Specifications Height: 26.6" (675mm) Width: 22.75" (580mm) Weight: 2.2lbs (1.0kg) **Once bars have been cut they are NON-returnable.**
Envy Soul Bars - Oversized
$129.99
The Soul bar was one of Envy's most popular bars! The previous model only came in Standard, and the new and improved version only comes in Oversized. **These bars are compatible with HIC compression, and SCS if you were to have the Slit removed.** Specifications: - 4130 Cro-mo - High 650mm/26.8" - Width 580mm/22.9" - Oversized clamp required - Weight 1.3kgs/2.9 pounds
Envy Union Bars 650mm
$129.99
Envy is very well known for their amazing handlebars, especially Flavio Pesenti's signature Reaper bar which is made of aluminum. With the increasing popularity in aluminum bars Envy knew it was time to release a new model for an aluminum bar and ended up creating a magnificent bar which comes in black, polished, and the most requested color being the oil slick and polished combo! Envy Union bars have the center piece forged and then welded onto the cross bar which then requires a 90 day "curing" process to ensure they will hold up as best as possible. Please be advised aluminum bars are not recommended for all riders. Aluminum bars are commonly used in the younger and smaller sized rider demographic. Due to aluminum being very lightweight the main factor to take into consideration is that they will not be as strong as a steel/ chromoly or titanium handlebar. Throwing your scooter in anyway whether intentional or not can easily cause these bars to bend or break so please be careful and take these factors into consideration when purchasing the product. Aluminum bars with a stock slit can run IHC as is, for SCS you must have an SCS which fits oversized bars and also have the stock slit fully cut off the bars. Aluminum bars can NOT work with HIC!
Envy Union V2 Bar
$129.99
The V1 Union bar took the world by surprise. Every rider wanted a pair for themselves but no shop could keep them on the shelves. The V2 is now new and improved featuring a stronger bar but the same unique design. These bars are Aluminum so if you're looking for a light pair of bars for you're next custom scooter, then these are the bars for you! Please be advised aluminum bars are not recommended for all riders. Aluminum bars are commonly used in the younger and smaller sized rider demographic. Due to aluminum being very lightweight the main factor to take into consideration is that they will not be as strong as a steel/ Chromoly or titanium handlebar. Throwing your scooter in any way whether intentional or not can easily cause these bars to bend or break so please be careful and take these factors into consideration when purchasing the product. Specifications: Bar Height/Width: 25.6" x 22.65" (650 x 575mm) Bar Material: Aluminum Slit: YES (1.6") Product Weight: 1.9 lbs. Aluminum bars with a slit are compatible with IHC as is (oversized clamp needed). Compatible with full-size SCS if the slit is removed. (NOT COMPATIBLE WITH HIC COMPRESSION)
Ethic DTC Dynasty V2 Bar (Standard)
$99.99
This is the evolution of the first Dynasty, much wider (580 mm) it now has molded gussets for a better resistance and the upper tube is now heat treated 4130 chromoly steel for durability. It is standard size and has a slit for IHC compression and has a starnut welded inside the bar for ICS but with the slit removed can also be used with SCS compression. Comes in flat black, trans black and chrome. Specifications: Standard size with slit 4130 Chromoly heat treated steel Height : 610mm Width : 580 mm Backsweep : 3 degrees Diameter : 31,9 mm Weight : 1120g (570mm)
Ethic DTC Deildegast Bar 720mm (Standard)
$169.99
For the Deildegast Bars Ethic really wanted to go beyond what they had been doing in the past technologically and on every other aspect. The Deildegast is a really wide, flexible, solid and comfortable bar designed with an optimal geometry. For the first time in the scooter industry Ethic is using multi-butted (7 thickness variations) coupled with a complete heat treatment to get a lighter, more resistant bar. The Deildegast Bars are one of Ethis DTC's most beautiful creations. 28.5" H x 24" W Standard steel bars compatible with ICS 10 only as is. Can be used with SCS if the slit is removed. Can be used with IHC if 3.5" is removed from the height of the bars and a slit installed.
Madd Gear MGP MFX Aluminium Aero Bar
$99.99
Madd Gear wanted to come out with a bar that has an excellent amount of durability and really light weight so they came out with the Aluminum Aero bars which are only 2 pounds! These bars are great for park style riding and any level of riding. They measure if at 24.75" tall and 24" wide WITH a 2 INCH SLIT. The MFX Aero Alloy Bar can be run on both SCS and IHC compression systems. Aluminum bars with a slit are compatible with IHC as is (oversized clamp needed). Compatible with full size SCS if the slit is removed. (NOT COMPATIBLE WITH HIC COMPRESSION)
Madd Gear MGP MFX R Willy Bars
$199.99
These bad boys have been in the works for the last 2 years. After a ton of intense testing by Ryan Williams and development by the one and only MGP, these bars are amongst some of the strongest and most anticipated bars in the game! Coming in at mind blowing 26.5'' Tall and 25'' wide, these bars are built for the true shedders out there! If a ridiculously sick design, tried and tested strength is what you're looking for in your next set of bars then the MGP "R Willy'' bars are definitely the ones for you!!! These bars are aluminum. Which means standard inner diameter and oversized outer diameter. There is no slit on these bars. Compatible with full size SCS only as is. For IHC a slit must be installed. Not compatible with HIC. SPECIFICATIONS Bar Height/Width: 26.5" x 25" (673 x 635mm) Bar Material : Aluminum Slit: NO Product Weight: 2.2 lbs.
Phoenix Lineage Bar (Oversized)
$114.99
Based on the OG Phoenix Suicide Bars, comes the Phoenix Lineage Bar. The Lineage Bar comes in BIG and features an awesome downtube graphic, as well as the 'Lineage' logo on the handlebar, in case you run clear Solace Grips. Overview: 26" Tall x 24" Wide Design based on Classic Phoenix Suicide bars 4130 Chromoly Construction Pad Printed Lineage Designs 34.9mm Oversized Downtube Sizing Heat Treated to Maximize Durability
Phoenix Lineage Bar (Standard)
$114.99
Based on the OG Phoenix Suicide Bars, comes the Phoenix Lineage Bar. The Lineage Bar comes in BIG and features an awesome downtube graphic, as well as the 'Lineage' logo on the handlebar, in case you run clear Solace Grips. Overview: 26" Tall x 24" Wide Design based on Classic Phoenix Suicide bars 4130 Chromoly Construction Pad Printed Lineage Designs 31.8mm Standard Downtube Sizing Heat Treated to Maximize Durability
TSI TV2 Bars - Standard
$129.99
Now introducing the TSI TV2 Bars! Not a lot has changed with the TV bars, but TSI decided it was time to sit down and revamp them to something new. The all new TV2 bars now feature a low profile V BMX style, updated geometery, the classic just got better. The TV2 bar is the choice of many riders all over the world and is available up to 27.25" tall and 24" wide! Standard bars without a slit are compatible with SCS only as is. For IHC, ICS, Mini HIC, and threaded compression systems a slit must be installed. Bar Height/Width: 27.25" x 24" (692 x 609mm) STANDARD Bar Material: Steel Slit: NO Product Weight: 3 lbs.
Page 1 of 1