Wheels

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet. - Bearing Type: SiNC Ceramic Sealed cartridge - System Weight Limit: 275lbs / 125kg - Total Wheelset Weight: 1240g

The Roval Control World Cup wheelset is the fastest in the world, and at just 998 grams, they’re also the lightest. Every detail was obsessively engineered with input from top pros to deliver unmatched performance at the highest level. Beyond its featherweight design, it boasts leading flat resistance, durability, and ride quality, proven by our Factory Team. The Roval Control World Cup isn’t just a wheelset; it’s a new benchmark in XC racing. - Use - XC racing & riding Weight - 998g (w/ valves and rim tape) - Recommended Tires - Fast Trak & Air Trak - Internal Width- 28.5mm - Hubs - Roval LF DT180 EXP - Bearings - Sinc Ceramic - Spokes - Roval Carbon w/ Ti Ends

AERO UNLIMITED Featuring an all-new 50mm aero Rim profile and next-generation R3-C aero hubs, the CADEX 50 Ultra Disc balances supreme aerodynamic performance with stability and control in all conditions. Innovative Super Aero bladed carbon spokes further enhance efficiency and minimize weight, while ceramic bearings reduce power loss by up to 30 percent. The wide 22.4mm inner rim width and hookless bead are optimized for high-volume tires and create a seamless interface with increased sidewall support and the ability to run lower tire pressures for improved handling and road feel. UCI & ITU Approved. FEATURES - Wind-tunnel-proven 50mm Hookless Aero Rim Profile, Super Aero carbon spokes and R3-C aero hubs combine for maximum aerodynamic advantage. - High-tensile-strength Super Aero carbon spokes minimize lateral flex for efficient acceleration and sprinting. - Custom-tuned Dynamic Balanced Lacing technology creates a stiffer, more efficient wheel with outstanding power transfer. - Precision machined R3-C40 aero rear hub reduces aerodynamic loss and virtually eliminates bearing load. - Ultra-smooth, low-rolling-resistance ceramic bearings offer improved action for minimal power loss. - Precision reinforced lay-up technology places carbon fiber only where needed, creating a strong, stiff rim structure with an overall wheel weight of 1349g. - Hookless rim technology features a continuous carbon fiber structure with an increased rim bead width of up to 3.8mm on each side to create a rounder tire shape for superior support, grip and handling. - Designed for today's higher volume road tires, the 22.4mm wide inner rim width creates an increased tire contact patch, resulting in better grip and a smoother ride. Specifications: - Tubeless: CADEX Tubeless System (rim tape and valve kit included) - Suggested Tire Size: 700 x 25C – 700 x 32C - Rim Height: 50mm - ETRTO: 622-22 - Hub Compatibility: Shimano HG / SRAM XDR 12 / Campagnolo - Bearing: CADEX Ceramic Bearings - Rear Axle: 142x12 Thru Axle - Weight (Rear): 754g

World Cup speed meets trail durability World Cup Fast, Trail Tough World Cup speed meets trail-ready durability with the new Control SL VI Solix. Weighing just 1,275g, these fly up climbs and feature a custom-tuned carbon lay-up optimized for better traction and stronger rims for impact resistance, 14% & 21% front & rear. Roval carbon spokes cut weight, while the i9 Solix hub .59 degree engagement ensure instant responsiveness. A 4mm FlatStop beadhook reduces pinch flats by 39%, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance. At a Glance Use XC Racing & Down Country Ripping Weight 1275g (with tape and valves) Rim Details Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm Hub & Engagement Hub: i9 Solix
0.59 degrees (insanely fast engagement) Spokes: Roval carbon spokes with Ti end pcs Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount Centerlock

Engineered for polka dot jersey contenders and riders who enjoy fast climbs, the Roval Alpinist CLX III is our lightest road wheelset yet at 1,131g, shedding 134g from its predecessor. A new lightweight hub and Roval Aero Composite Spokes by ARRIS save 103.5g, while being 20% stronger than steel. And the proof is in the performance, helping Demi climb the Tourmalet 5 seconds faster than she ever has.

Smoother is Faster Traverse SL II Hydra2 The Traverse SL II delivers lightweight performance that’s perfect for riders who want to ascend fast and descend with control. It features four key innovations. First, optimized front and rear rim layups boost strength by 15% and 25%, respectively. Second, shallow rim geometry increases vertical compliance by 21% for better impact absorption. Third, the engineered “ankling” enhances traction, stability, and control. Finally, the FlatStop rim bead requires 85% more force to pinch flat. At a Glance Use - Trail Weight - 1,757 grams (with valves and tape) Front: 795g Rear: 962g Recommended Tires - Butcher & Eliminator Internal Width - 30mm Hub - Industry Nine Hydra2 145 Teeth / 0.41 Degrees Spoke Count - 28H Front and Rear Rear Freehub Body - Industry Nine Hydra 2: Sram XD

The Roval Control World Cup wheelset is the fastest in the world, and at just 998 grams, they’re also the lightest. Every detail was obsessively engineered with input from top pros to deliver unmatched performance at the highest level. Beyond its featherweight design, it boasts leading flat resistance, durability, and ride quality, proven by our Factory Team. The Roval Control World Cup isn’t just a wheelset; it’s a new benchmark in XC racing. - Use - XC racing & riding Weight - 998g (w/ valves and rim tape) - Recommended Tires - Fast Trak & Air Trak - Internal Width- 28.5mm - Hubs - Roval LF DT180 EXP - Bearings - Sinc Ceramic - Spokes - Roval Carbon w/ Ti Ends

Survival of the Strongest Traverse HD 240 DEG The Traverse HD is the strongest carbon trail wheel we’ve ever tested, engineered for those who live to send it—maybe harder than they should. Designed to handle big hits and rowdy lines, the Traverse HD 240 DEG is built to keep rolling no matter how hard you charge. At a Glance Use - Aggressive Trail, Enduro Weight (29") - 1,795 grams (with valves and tape) Front: 780g Rear: 1,015g Recommended Tires - Butcher and Eliminator Internal Width - 30mm Hub - DT Swiss 240 DEG 90 Teeth / 4 Degrees Spoke Count - 29 Front: 28H / 29 & 27.5 Rear: 32H Rear Hub - DT Swiss 240 J-Bend, 6-Bolt, 12x148mm

AERO UNLIMITED Featuring an all-new 50mm aero Rim profile and next-generation R3-C aero hubs, the CADEX 50 Ultra Disc balances supreme aerodynamic performance with stability and control in all conditions. Innovative Super Aero bladed carbon spokes further enhance efficiency and minimize weight, while ceramic bearings reduce power loss by up to 30 percent. The wide 22.4mm inner rim width and hookless bead are optimized for high-volume tires and create a seamless interface with increased sidewall support and the ability to run lower tire pressures for improved handling and road feel. UCI & ITU Approved. FEATURES - Wind-tunnel-proven 50mm Hookless Aero Rim Profile, Super Aero carbon spokes and R3-C aero hubs combine for maximum aerodynamic advantage. - High-tensile-strength Super Aero carbon spokes minimize lateral flex for efficient acceleration and sprinting. - Custom-tuned Dynamic Balanced Lacing technology creates a stiffer, more efficient wheel with outstanding power transfer. - Precision machined R3-C40 aero rear hub reduces aerodynamic loss and virtually eliminates bearing load. - Ultra-smooth, low-rolling-resistance ceramic bearings offer improved action for minimal power loss. - Precision reinforced lay-up technology places carbon fiber only where needed, creating a strong, stiff rim structure with an overall wheel weight of 1349g. - Hookless rim technology features a continuous carbon fiber structure with an increased rim bead width of up to 3.8mm on each side to create a rounder tire shape for superior support, grip and handling. - Designed for today’s higher volume road tires, the 22.4mm wide inner rim width creates an increased tire contact patch, resulting in better grip and a smoother ride. Specifications: - Tubeless: CADEX Tubeless System (rim tape and valve kit included) - Suggested Tire Size: 700 x 25C – 700 x 32C - Rim Height: 50mm - ETRTO: 622-22 - Hub Compatibility: Shimano HG / SRAM XDR 12 / Campagnolo - Bearing: CADEX Ceramic Bearings - Front Axle: 100x12 Thru Axle - Weight (Front): 595g

Zipp's 404 Firecrest Carbon Clincher wheelset is a testament to all-around advancement in wheel design. Its 58mm aero depth and wide profile provides proven performance in all situations, and at 1,690g (700c), you'll feel confident staying the course in less-than-ideal conditions. Whether you're looking for everyday riding performance or a race day wheelset to stay ahead of the pack, the 404 Firecrest has a great balance of weight, stability, and efficiency that complements strong riders. Zipp's 77/177 hubset, laced with Sapim CX-Sprint spokes, provides maintenance-free reliability and lateral stiffness, while trusted stopping power is supplied via Tangente Platinum Pro Evo brake pads. Included with each wheel are a Zipp-integrated Valve Extender with valve-core wrench, rim tape, and quick release.

From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that's unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions. Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels. What's being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you're able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what's ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels. Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer-the Roval Terra CLX II checks every box with authority. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width—ERD 577mm - Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm Tire Size: 28mm—47mm—Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve) Assembly Method: Hand built at every step, from rim layup to the last nipple turn. Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

The all-new SLR 0 WheelSystems offer maximum all-day efficiency for climbing, sprinting, and descending. With wide and durable hookless rims, the SLR 0 40s also offer confidence-inspiring handling, all at a super-light weight.

Developed in Specialized's Win Tunnel and designed to interface with the world’s fastest tire, the S-Works Turbo, the Roval CLX 64 is the fastest road race wheel/tire system Specialized has ever developed. The 20.7mm tubeless-ready internal rim width further increases tire volume, in turn creating a larger contact patch. Specialized's wheel system comes complete with the S-Works Turbo tire, which measures 24mm wide for enhanced stability and traction in corners and on descents. Throw these on and watch the competition flail helplessly in your wake.

World Cup speed meets trail durability World Cup Fast, Trail Tough World Cup speed meets trail-ready durability with the new Control SL VI Solix. Weighing just 1,275g, these fly up climbs and feature a custom-tuned carbon lay-up optimized for better traction and stronger rims for impact resistance, 14% & 21% front & rear. Roval carbon spokes cut weight, while the i9 Solix hub .59 degree engagement ensure instant responsiveness. A 4mm FlatStop beadhook reduces pinch flats by 39%, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance. At a Glance Use XC Racing & Down Country Ripping Weight 1275g (with tape and valves) Rim Details Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm Hub & Engagement Hub: i9 Solix
0.59 degrees (insanely fast engagement) Spokes: Roval carbon spokes with Ti end pcs Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount Centerlock

Engineered for polka dot jersey contenders and riders who enjoy fast climbs, the Roval Alpinist CLX III is our lightest road wheelset yet at 1,131g, shedding 134g from its predecessor. A new lightweight hub and Roval Aero Composite Spokes by ARRIS save 103.5g, while being 20% stronger than steel. And the proof is in the performance, helping Demi climb the Tourmalet 5 seconds faster than she ever has.

The all-new SLR 0 WheelSystems offer maximum all-day efficiency for climbing, sprinting, and descending. With wide and durable hookless rims, the SLR 0 40s also offer confidence-inspiring handling, all at a super-light weight.

The Revolution line of rims has been in development since June of 2018. The basis of the whole program was to round out a complete rim offering while implementing all that we learned about The Movement line of rims. We've said it before, and we will repeat it, not all carbon rims are made the same way. We developed an entirely new molding process that improves our layup processing and accuracy. The Revolution mold process allows for even more precise fiber placement and extension than our previous designs. Each rim is still hand-made right here in Kamloops BC! The all-new rim shape allowed us to reduce radial stiffness and utilize less fiber while increasing impact strengths as well. The shape combined with the layup offers a more homogenous system and provides more support to each component of the rim than ever before. We are excited to introduce our new line up! Let the Revolution begin.

World Cup speed meets trail durability World Cup Fast, Trail Tough XC speed meets trail-ready durability with the new Control SL VI 350. Weighing just 1,478g, these fly up climbs, they feature a tuned carbon lay-up for better traction and a stronger rear rim for impact resistance. DT Swiss Revolution spokes pair with the durable and fast engaging DT Swiss Star Ratchet for 10 degree engagement. A 4mm FlatStop bead hook minimizes pinch flats, and an asymmetric rim profile boosts longevity—blending speed, control, and durability for elite performance. At a Glance Use XC Racing & Down Country Ripping Weight 1,478g (with tape and valves) Rim Details Depth: 25mm, External Width: 37mm, Internal Width: 29mm, Bead Hook Width: FlatStop 4mm Hub & Engagement Hub: DT Swiss, Star Ratchet 36T
10 degrees Spokes: DT Swiss Revolution spokes Tire Recommendation AirTrack and Fast Track Tires Approved Tire Widths: 1.9” to 2.6” Brake Mount 6-bolt

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SMOOTHER IS FASTER Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance. LIGHTER At 1,645 grams, this is our lightest trail wheelset ever. STRONGER Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. CONTROL-BOOSTING VERTICAL COMPLIANCE 21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control. TRACTION MONSTER Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs. INTENDED USE Trail WEIGHT (29) 1,645g 240 EXP (with valve and tape) WHEEL SIZES: 29 2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Survival of the Strongest Traverse HD 350 DEG The Traverse HD is the strongest carbon trail wheel we've ever tested, engineered for those who live to send it—maybe harder than they should. Designed to handle big hits and rowdy lines, the Traverse HD 350 DEG is built to keep rolling no matter how hard you charge. At a Glance: - Use: Aggressive Trail, Enduro - Weight (29"): 1,884 grams (with valves and tape), Front: 824g, Rear: 1,060g - Recommended Tires: Butcher and Eliminator - Internal Width: 30mm - Hub: DT Swiss 350 DEG, 72 Teeth / 5 Degrees - Spoke Count: 29 Front: 28H, 29 & 27.5 Rear: 32H

Smoother is Faster Traverse SL II Hydra2 The Traverse SL II delivers lightweight performance that’s perfect for riders who want to ascend fast and descend with control. It features four key innovations. First, optimized front and rear rim layups boost strength by 15% and 25%, respectively. Second, shallow rim geometry increases vertical compliance by 21% for better impact absorption. Third, the engineered “ankling” enhances traction, stability, and control. Finally, the FlatStop rim bead requires 85% more force to pinch flat. At a Glance Use - Trail Weight - 1,757 grams (with valves and tape) Front: 795g Rear: 962g Recommended Tires - Butcher & Eliminator Internal Width - 30mm Hub - Industry Nine Hydra2 145 Teeth / 0.41 Degrees Spoke Count - 28H Front and Rear

The all-new Roval Rapide CL III wheels are a direct descendent of CLX III, turning aerodynamic convention on its head. A deeper front rim puts aerodynamic performance where it matters most. A shallower rear rim cuts unnecessary weight for faster acceleration and improved handling, helping save 35g. FlatStop Bead Hooks require 39% more force to flat, ensuring your race goes all the way to the line with best-in- class flat protection. Get there fast on any course with Roval Rapide CL III. Use - Road Racing & Riding. Weight - 1,555 grams Hub & Engagement - DT Swiss 350 EXP, 36T Rim Depth - 51mm front, 48mm rear Spoke Count - 18F / 24R Recommended Tire Size - 28mm

SMOOTHER IS FASTER: Trail riders who prize nimble handling will be blown away by the category-leading control, strength-to-weight ratio, and pinch-flat resistance of Traverse SL II i9. STRONGER: Front and rear-specific rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. VERTICAL COMPLIANCE: The new Traverse SL II i9 1/1 is 21% more vertically compliant than the previous model (delivered through a shallow rim shape and front/rear-specific layup), which enables enhanced terrain-hugging and bump-force-absorbing control. TRAVERSE SL II i9 1/1: TRACTION MONSTER: Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE: Engineered rim offset enables balanced spoke tension for improved fatigue life. SAYONARA PINCH FLATS: Our U.S. patent pending Flat Top bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites.” AIR TIME: Thank our genius engineer, Chuck Teixeira, for inventing the “Roval ThreadBed Valve”—a valve that threads directly into the rim. This ingenious design eliminates compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. HIGH ENGAGEMENT: The i9 1/1 hub optimizes control via a dual-phased-pawl drive mechanism, accomplishing 90 points of engagement and 4° engagement by way of a six-pawl driver and 45-tooth drivering. The result is immediate power transfer from the pedals to the drivetrain, propelling riders forward with minimum lag. Perfect for ratcheting through techy sections. LIFETIME WARRANTY: On Roval Wheels when registered within the first 90 days of purchase. CRASH REPLACEMENT: 2-Year “It Happens” No Fault Crash Replacement—If you damage your Roval product while riding within the first two years of ownership and it’s not covered under warranty, we’ll still replace or repair it. “It Happens” is market-specific, and wheels must be registered. Please contact Rider Care in your Country for more details. - Rim: Traverse SL II Asymmetric, Carbon, 29", Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts, Compatible with Roval Threaded Valve Stem - Rim Details: 20mm Depth, 40mm External Width, 30mm Internal Width, 5mm Bead Width, Threaded Valve Insert - Hub: i9 1/1 J-Bend 6-bolt, Six pawl driver and 45 tooth drivering (4 degs) , 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub) - Bearing Type: Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race J-Bend, Front: Two-cross (1:1) 28 count, R: 288, L: 284 - Rear: Two-cross (1:1) 28 count, DS: 283mm NDS: 284mm - Nipple: Sapim, Secure Lock Double Square, Alloy, 18mm - Tire Size: 2.3" - 2.6" - Max Pressure: 2.3-2.6'': 40 psi - Weight: Wheelset 1,780g, Front 809g, Rear 971g (Including tubeless rim tape and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape, Threaded Valve Stem 37mm (Tire Insert Compatible), Spare Spoke & Nipple Kit, 31mm Endcaps, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Roadies all drool over carbon wheels, but the price tag often puts them out of reach. The new C 38 Disc wheels break down this barrier while bringing reliable, high performance carbon road wheels to the masses. With the C 38, we developed an all-new, lightweight, and durable carbon rim with the modern features that savvy riders demand, and then we paired it with trusty DT Swiss components, like DT 350 rear hub internals and Competition spokes, for a build that ticks all the boxes on your wish list. The new C 38s are the perfect depth (38mm), too, so they'll feel at home on everything from gravel bikes, to aero bikes, and everything in between. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval tubeless tape and tubeless valves - Front Hub: DT Swiss 350 Disc for Roval, 100x12mm, Center Lock - Front Spoke Pattern: Two-cross/Radial - Nipple Type: DT Swiss Pro Lock Brass hexagonal - Rear Hub: DT Swiss 350 Disc for Roval, 142x12mm, Center Lock, 11-speed - Rear Spoke Pattern: Two-cross/Two-cross - Rim Depth: 38mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 21mm internal, 26.6mm external - Spoke Count: 24 front, 24 rear - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1,560g

SURVIVAL OF THE STRONGEST: More than the strongest carbon wheelset in our known universe, Traverse HD i9 delivers unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on World Cup Downhill track. STRONG LIKE BULL (NO BULL): Our strongest rim shape, combined with off-set spoke drilling and molded with optimized carbon fiber for front and rear-specific characteristics, adds up to the strongest carbon trail wheels we have ever made. SMOOTH AND STRONG: The front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness and impact strength. HIGH PRECISION HANDLING: The fusion of control and durability—where stiffness meets grip, Traverse HD i9 glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS: Our U.S. patent pending Flat Top bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites.” AIR TIME: Thank our genius engineer, Chuck Teixeira, for inventing the “Roval ThreadBed Valve”—a valve that threads directly into the rim. This ingenious design eliminates compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. HIGH ENGAGEMENT: The i9 1/1 hub optimizes control via a dual-phased-pawl drive mechanism, accomplishing 90 points of engagement and 4° engagement by way of a six-pawl driver and 45-tooth drivering. The result is immediate power transfer from the pedals to the drivetrain, propelling riders forward with minimum lag. Perfect for ratcheting through techy sections. LIFETIME WARRANTY: On Roval Wheels when registered within the first 90 days of purchase. CRASH REPLACEMENT: 2-Year “It Happens” No Fault Crash Replacement—If you damage your Roval product while riding within the first two years of ownership and it’s not covered under warranty, we’ll still replace or repair it. “It Happens” is market-specific, and wheels must be registered. Please contact Rider Care in your Country for more details. DETAILS: - Rim: Traverse HD Asymmetric, Carbon, Front: 29" - Rear: 29'' and 27.5'', Disc Brake, Zero Bead Hook Design, Tubeless Compatible, Compatible with Tire Inserts, - - Compatible with Roval Threaded Valve Stem - Rim Details: 24mm Depth, 40mm External Width, 30mm Internal Width, 5mm Bead Width, Threaded Valve Insert - Hub: i9 1/1 J-Bend 6-bolt, Six pawl driver and 45 tooth drivering (4 degs) , 110x15mm & 148x12mm, Sram XD Freehub (Convertible freehub ) - Bearing Type: Sealed Steel Cartridge Bearings - Spokes: Sapim D-Light J-Bend, 29: Front: Two-cross (1:1) 28 count, R: 286, L: 282 - Rear: Two-cross (1:1) 32 count, DS: 287mm NDS: 287mm - 27.5: Rear: Two-cross (1:1) 32 count, DS: 268mm NDS: 269mm - Nipple: Sapim, Secure Lock Double Square, Alloy, 18mm - Tire Size: 2.3" - 2.6" - Max Pressure: 2.3-2.6'': 40 psi - Weight: Wheelset 1,830g, Front 812g, Rear 1018g (Including tubeless rim tape and tubeless valve) - Assembly Method: Hand-built - Extras: Roval Tubeless Rim Tape, Threaded Valve Stem 37mm (Tire Insert Compatible), Spare Spoke & Nipple Kit, 31mm Endcaps, Lifetime Warranty, System Weight Limit: 275lbs / 125kg

The all-new Roval Rapide CL III wheels are a direct descendent of CLX III, turning aerodynamic convention on its head. A deeper front rim puts aerodynamic performance where it matters most. A shallower rear rim cuts unnecessary weight for faster acceleration and improved handling, helping save 35g. FlatStop Bead Hooks require 39% more force to flat, ensuring your race goes all the way to the line with best-in- class flat protection. Get there fast on any course with Roval Rapide CL III. Use - Road Racing & Riding. Weight - 1,555 grams Hub & Engagement - DT Swiss 350 EXP, 36T Rim Depth - 51mm front, 48mm rear Spoke Count - 18F / 24R Recommended Tire Size - 28mm

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

SMOOTHER IS FASTER Trail riders who prize nimble handling will be blown away by Traverse SL II's category-leading control, strength-to-weight ratio, and pinch-flat resistance. LIGHTER At 1,645 grams, this is our lightest trail wheelset ever. STRONGER Front and Rear Specific Rims with carbon layups optimized for strength and weight boast 15% greater front wheel strength and 25% more rear wheel strength than the previous Traverse SL. CONTROL-BOOSTING VERTICAL COMPLIANCE 21% more vertically compliant than the previous Traverse SL (delivered through Shallow Rim Shape and front/rear specific layup) enables enhanced terrain hugging and bump-force absorbing control. TRACTION MONSTER Carefully engineered rim shape intentionally flexes for improved support and traction to boost confidence and control. TOUGH LIFE, LONG LIFE Engineered rim offset enables balanced spoke tension for improved fatigue life. Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer Chuck Teixeira for inventing the "Roval ThreadBed Valve"; a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, and makes tire set-up easier, and reduces sealant clogs. INTENDED USE Trail WEIGHT (29) 1,645g 240 EXP (with valve and tape) WHEEL SIZES: 29 2 Year "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs