Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX Parts

Fiend Reynolds Frame V2
Designed by Garrett Reynolds. Constructed from heat-treated 4130 chromoly with an internal gusset in the toptube and an external gusset on the downtube. The frame’s tubing is double butted with a heat-treated Mid BB shell and headtube, externally butted seat tube with integrated post clamp and integrated chain tensioners. Available with or without removable seat stay brake mounts and cable guide. Geometry: 21" top tube length HT 75.5 Degrees ST 71 Degrees CS 13" 9" seat tube height (bottom bracket to top tube, center to center) BB height: 11.625"
WeThePeople Battleship Frame - Jordin Godwin Signature
$419.00 $469.99 11% Savings
COMBINING CUTTING EDGE HYDROFORMING TECHNOLOGY WITH INPUT FROM TEAM RIDERS DAN KRUK AND JORDAN GODWIN, THE BATTLESHIP FRAME IS THE PERFECT MATCH FOR THE PROGRESSIVE STREET RIDER. BOASTING AN INCREDIBLY SHORT 12.7" CHAINSTAY, THICKER CNC MACHINED DROPOUTS (DESIGNED TO WORK FLAWLESSLY WITH HUB-GUARDS AND PEGS), AND A FULLY BRAKELESS DESIGN; THE BATTLESHIP IS A SUPER TOUGH, NO-NONSENSE STREET WEAPON WITH OUR MOST RESPONSIVE GEOMETRY YET. Includes lifetime guarantee. SPECIFICATIONS TUBING: Butted, seamless 4130 chromoly tubing japanese TOPTUBE: 20.5", 20.75 "or 21" TT CHAINSTAY LENGTH: 12.7" slammed, 13" centered ANGLES: HT: 75.5 °, ST: 71 ° BOTTOM BRACKET: mid-bb width: 74mm, height: 11.7 ", cnc machined and heat-treated HEADTUBE: taller 127mm height, cnc machined and heat-treated, integ. h / set DROPOUTS: 6mm thick laser cut and heat-treated, new shape for perfect hubguard/peg fit even when slammed SPECIAL FEATURES: Hydroformed top and down tube for the strongest possible connection to the headtube Super strong, technical street frame with the shortest chainstay possible Taller 127mm extended headtube for less spacers with an uncut fork Wider rear triangle allows clearance for a 2.5" tire Fully brakeless frame Slim profile integrated seat clamp
Odyssey Anti-gram Cassette / Hazard Lite Rear Wheel
The Hazard Lite Cassette is as good as it gets as far as complete wheels go. Take a black Antigram rear hub and lace it to a hard anodized black Hazard Lite rim and you end up with perfection. ANTIGRAM HUB - 36-hole - 2014-T6 aluminum shell - 14mm inbound axle - 9-T Driver - Left or right hand drive Compatible - Hub Guard (Optional) HAZARD LITE RIM - 6000 series aluminum - 32mm wide - 17mm TA
Cinema BMX FX C38 Freecoaster Rear Wheel
The FX C38 freecoaster wheel consists of the double wall and welded C38 rim, laced to the popular FX freecoaster. This 36-hole wheel is hand laced 3x with 14-gauge spokes and brass nipples, providing superior strength. All Cinema wheels come with a Cinema rim strip and Cinema hub guards! Specifications - Colors: Black, Black/Polished - Hub: Cinema FX Freecoaster - Driver: 9-Tooth - Drive Side:Left or Right Hand Drive - Rim: Cinema C38 - Spokes: 36 Stainless Steel - Weight: 3lbs 2oz
Profile Racing Mini Male 14mm Rear Cassette Hub
Hand Made in the USA! The Profile Mini cassette sets the benchmark for Cassette hubs and was the first BMX Cassette hub. Refined over the years the hub features a heat treated Cromo 14mm hollow axle with 17mm nuts (You can upgrade to a titanium Axle at checkout). The hub uses the bulletproof Profile driver with 4 pawls and bearings for super smooth engagement and a loud click. Specs: Axle: 14mm Hollow Crmo Axle Hub Shell: Mid/Low Flange 6061 heat treated Aluminium Spoke Holes: 36h Driver: 9t through to 18t - Crmo Driver Pawls: 4x Pawls Driver Bearings: 2x 6802 Hub Bearings: 2x 6903 Weights: Standard: 501g / 17.65oz - 14mm Hollow Crmo Axle and Crmo 9t driver
Odyssey Clutch V2 Freecoaster Hub
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. Same Clutch coaster hub you’ve come to love, but with a few upgrades. Features: - Maximum strength axle design - Super-durable bearing arrangement throughout - 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required. - Super-durable drag mechanism design - Crankflip ready Improvements Over the Clutch V1: - 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability - Improved clutch engagement - Improved manufacturing precision throughout - More slack than the V1 hub - All-new durable proprietary plastic spec for the removable hub guard Specs: - 36-hole, 2014-T6 aluminum shell - 9T Driver - Left or right hand drive - 22 oz / 623g Guard Options: - Plastic hub guard included (but optional to use) - Alloy hub guard also available
Odyssey ThunderBolt + Crankset
The Thunderbolt+ is our tried and true Thunderbolt cranks, but now it includes a Mid BB and updated graphics! The Thunderbolt crank is one of the most technically advanced crank designs on the market. Continued advancements in our legendary 41-Thermal® processing and heat-treatment system, have increased the fatigue life of the crank arms by a massive margin. Light. Strong. Proven. FEATURES - Laboratory tested and team proven - Updated open-ended spindle cap - New wedge cluster band with greater flexibility - Never-Wobble™ crank arm and spindle interface guarantee - 41-Thermal® lifetime replacement warranty against bending, cracking and breaking
Eclat Maverick Crankset
Behold the MAVERICK cranks. These cranks are all about strength, as anyone who’s ever snapped a pair of cranks will know; it’s usually at the welding where things let go. This is where alloy really comes into its own, being able to forge in a 3D shape means you can avoid the welding, and therefore the weak spot. What’s totally unique about the Mavericks is their use of a regular 48 spline. Until now alloy cranks were only available with a mountain bike style square spindle and a pinch bolt on the arm. We wanted to raise the bar and clean up the looks, and thanks to a heat treated crmo insert into the alloy its all been made possible. The spindle boss has received the same treatment, and a new approach to the design of this area means troublesome threads are a thing of the past.
Odyssey Calibur Crankset
The Calibur Cranks are our new “traditional” 3-piece, 4130 chromoly cranks. With all the hardware and sealed bottom bracket included, these retail for the great price. FEATURES - LHD/RHD Compatible - Post-Weld Heat-Treated 4130 Chromoly Arms - Hollow 22mm, 48 Spline, Chromoly Spindle - 6mm Spindle Bolts - Sealed Bottom Bracket Included
WeThePeople Helix V2 Freecoaster Hub
$229.99 - $239.99
The Helix hub will take you backwards in style and holds up to any peg abuse that comes its way. Pair it up with WTP's plastic hub guards for extra protection (sold separately). - 6061-T6 alloy refined hub-shell - 14mm hollow bore / hardened heat-treated chromoly axle - Two-high quality sealed bearings - Twin sealed bearing and bushing system - One-piece driver design - Unique internal arrangement with face-bearing clutch stopper
Eclat Coda Fork
With a team of heavy hitters including the likes of Dillon Lloyd, Bruno Hoffmann, Sean Burns and Alex Kennedy, we needed a fork that would hold up to just about anything. The new Éclat Coda Fork was built with strength in mind. Made out of full liquid post heat-treated seamless 4130 crmo with fully CNCd steerer and butted fork blades, the Coda Fork uses peg friendly invest cast dropouts and clearance for 2.50? and larger tires. We wanted the fork to be available for all riders so we offer the fork in two offsets, 26mm for technical street riding and a more traditional 32mm for all round riding. Weighing in at 1028g (36.26oz) these forks are the perfect balance between strength and weight, and with the Éclat team’s stamp of approval what more could you want in a fork? Backed by our full Lifetime Guarantee.
Cinema BMX VX2 C38 Front Wheel
The VX2 C38 front wheel consists of the super wide C38 rim laced to the VX2 front hub. This 36-hole wheel is hand laced 3x with 14-gauge spokes and brass nipples, providing superior strength. All Cinema wheels come with a Cinema rim strip and Cinema hub guards! Specifications - Colors: Black, Black/Polished - Hub: Cinema VX2 - Rim: Cinema C38 - Spokes: 36 Stainless Steel - Weight: 2lbs 6oz
Fiend Process IC Fork
The Process IC Fork features fully heat-treated chromoly tubing throughout with a 1pc. machined steerer tube with integrated bearing race for use with all 45×45 headsets and a 7000 series alloy compression bolt. The 6mm thick investment cast drop out and lower leg junction provide the ultimate strength while maintaining a clean look and the 20mm offset helps keep the front wheel under the rider for for more responsive steering. Fits 3/8"(10mm) axles only.
SaltPlus Trapez Cassette Hub
Durable cassette hub from Saltplus. The saltplus Trapez hub features the switch drive system that allows the hub to be switched to either RSD or LSD. Includes cone nut for Saltplus PRO Nylon hubguard. Material: alloy hub shell, CrMo 14mm hollow axle Size: 14mm hollow axle Spoke holes: 36 holes Bearings: high quality sealed bearings Colors: black, oil slick, green acid drip, gold acid drip Driver: 9t one piece driver Features: left side / right side switch system SDS, slim low flange hub, steel cone nuts, includes cone nut for Saltplus PRO Nylon hubguard Weight: 572g (1.26lb / 20.17oz)
MacNeil Network Cassette Hub
$194.99 $214.99 9% Savings
Here we have the MacNeil "Network" Cassette Hub - Female. You will get a high quality Cassette hub no matter if male or female version. The SDS system of the MacNeil "Network" Cassette Hub let you easily switch the driver between RHD and LHD and it has 3 sealed bearings in the driver which makes this great hub longlasting and ready for hard street riding. - 36 hole only - High-quality Japanese body bearings - One-piece 9T driver with 3 Japanese bearings - Switch Drive System (SDS) allows for easy switch between LHD and RHD - Dialed 3-pawl engagement system - Available with female axle or traditional straight axle system - Aluminum hardware - Weight: 470 grams - Colors: Polished
SaltPlus EX Fork
Material: crmo blades, crmo steerer tube Size: 3/8" dropout slot Colors: glossy black Offset: 28mm Features: hydroformed 1pc crmo steerer tube, reduced weight and improved tapered blade design and stronger steerer tube, includes M24 steel topcap Weight: 1148g (40.49oz : 2.53lbs)
S & M Bikes FU Handlebar (10-inch)
$99.99 - $129.99
10-inch rise puts your grips up in the stratosphere, and four-piece chromoly construction means S&M's FU Handlebar doesn't skimp on durability. At 30 inches wide these big bars give you all the control you need and then some.
S & M Bikes FU Handlebar (9-inch)
$99.99 - $129.99
9-inch rise puts your grips up in the stratosphere, and four-piece chromoly construction means S&M's FU Handlebar doesn't skimp on durability. At 30 inches wide these big bars give you all the control you need and then some.
Eclat Blind Front Hub
$99.99 - $124.99
The eclat "Blind " Front Hub is a high quality low flange front hub with a CNC machined hub shell made of 6061-T6 aluminium including a heat treated 14mm CrMo female hollow axle and high quality sealed bearings. The included CNC machined washers of the eclat "Blind " Front Hub provide a clean look. With the separately available eclat "Blind / Pulse" Front Hub guard you are able to protect both flange sides of this front hub.
Fitbikeco S4 Aitken Stem
Made from CNC'd 6061 Aluminium in the USA. This BMX stem is basically a lighter version of the classic S&M challenger stem designed by Mike Aitken. Specs: Reach: 51mm Rise: 24mm Bar Clamping Diameter: 22.2mm Weight: 294g
Odyssey 49er 4-PC Bar
Odyssey's 49er is a traditional-looking 4-piece bar that uses multi-butted main tubing, traditional 7/8" crossbar for strength, larger radius bends for greater durability, and welded end caps to reduce flex. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. SPECS - 9-inch Rise - 29-inch Width - 1.5° Upsweep - 12° Backsweep - 2lbs 3.4 oz
Fiend Garrett Reynolds V3 Stem
Garrett Reynolds signature stem by Fiend. This front load stem is machined from 6061 aluminium and features a short 48mm reach, a 32mm stack height and solid, durable bolts. Specs: Reach: 48mm Rise: 8mm Bar Clamping Diameter: 22.2mm Weight: .714 lb
Fitbikeco Hoodbird Bar
Morgan Long’s signature bar is big but on the lighter side with a comfortable geometry everyone can get behind. Butted 4130 CrMo Tubing Dual Radius Bends w/ large top bend to increase strength American Made SPECS Rise: 9.5" Width: 29" Back Sweep: 11° Up Sweep: 3° Cross Bar Diameter: .75" Crossbar Height" 7" Crossbar Width: 11.34" Weight: 2.21 lbs. / 1 Kgs
S & M Bikes Challenger Stem
The Challenger stem is back friends… and yes, it’s exactly the same as the original. So obviously, this hunk of awesome is much too heavy for you new-school-weight-whores at 12.8 oz. Any heavier and you might get too buff from the work out and be unable to fit in your sister’s jeans…bummer, I know. Grade 8 Allen head hardware Includes 6mm wrench & sticker Made in USA REACH: 49 mm RISE: 24.8mm/ 6.7mm Inverted MATERIAL: 6061-T6 Aluminum WEIGHT: 12.8 oz
CULT Cuatro 4 Piece Bar
The Cult Cuatro 4 piece bars are built from heat treated 4130 chromoly tubing with a large radius bends for added strength. The Cuatro bars are available in a few sizes and colors to fit most BMX rider's needs.
No Image
UK street magician Jordan Godwin has been on fire recently, so we decided to reward him with his own signature set of bars. Jordan wanted a 9? rise bar with a slightly smaller box than our other bars but with narrower width of 27.75? to eliminate the need to take a hacksaw to them. The large radius bends give the Chocolate bar a classic round shape, and the 25.4mm Oversize (OS) clamping option allows you to pair it up to one of our 25.4mm stems for a truly unstoppable front end set which will have you throwing hard 540s like the man himself in no time…
Fiend Reynolds Bar
Garrett didn't want to cut his bars down in width anymore so we did the work for him with the width of his choice. Same proven heat treated and butted chromoly as our Team bar. 9" rise 27.25" width 12° backsweep 1° upsweep 1.6 lbs 13-butted heat-treated 4130 Chromoly
Fiend Team Bars
The Fiend Team bars are 2-pc handlebars made from 4130 heat-treated Chromoly with a 20mm crossbar and 13-butted to help keep weight down.
Primo 7 Series Balance 36H Rim
The rim features the same previous versions, but it is constructed from the light weight 7005 Aluminium which is stronger. The Balance rims have double walled i-beam internal construction and is drilled out between the spoke holes to save weight. Features: 7005 Aluminium double walled rims. Size: 36h. Double walled, Welded seam, Offset spoke holes, Internally machined holes. Weight: 15.4oz
S & M Bikes Hoder High Handlebar - 9
S&M's Hoder High Bars are way up there, just like you when you pull back and launch off your favorite feature. A 9-inch rise gives you plenty of leverage, and an 11-degree backsweep puts you in the perfect position for awesome control. It's American-made so you know you're getting S&M's legendary quality. It's light, tough, and comfortable, so get out there and push your limits!
Page 1 of 4 Next page