Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX Parts

Animal Foursome 9.5
$109.99
Multi-Butted Chromoly 4 pc Bars. Post Weld Heat Treatment. Rise: 9.5" Width: 29.5" Backsweep: 11° Upsweep: 5° Crossbar height: 6.5" Crossbar Width: 10.25" Color - Black LIFETIME WARRANTY against breakage.
BSD DonnaSQUEEK Tires
$49.99
The Donnasqueak tires is one of the most popular tires on the market, constructed by the best tire company from the best materials so they not only look good and perform great but also weigh less than their competitors. With a micro knurled tread and smooth centre section for low rolling resistance, these tires grip and feel great. **Rim not included with the purchase of the tire**
BSD DonnaSTREET Tires
$49.99
The Donnastreets are our new tire, based on the same proven rubber as the popular Donnasqueak tires but with an all-over smoother tread for more grip and sidewalls which sit further round the side of the tire wall for better grind performance…. – Smooth center for low rolling resistance – Extra grippy & super squeaky compound – Tear resistant silkworm casing – Rated up to 110 psi Weight: 2.3? – 690g 2.4? – 730g **Rim not included with the purchase of the tire**
BSD Stacked Stem - Polished
$89.99
The Stacked stem is the tallest stem in our range, at 33mm tall it will stack your bars up! CNC machined from 6061-T6 this stem grips like a vice. Specifications: Rise: 33mm Reach: 50mm Clamp Size: regular 7/8" Weight: 312g
CULT AK Grip
$17.99
The Cult AK grips are Alex Kennedy`s signature model featuring an asymmetrical design with circular mushroom style pattern on one end and diamond pattern on the other. Similar to the Cult Vans grips, but with a larger diameter and extra ribs to fit AK`s style of riding.
Cinema BMX Martinez Stem - Black
$95.00
The Martinez stem is inspired by classic looking top load stems with key improvements in strength and geometry. A 48mm reach gives a responsive feel while the standard 22mm rise can be reduced to just 8mm by inverting the stem. Six oversized Allen key bolts provide plenty of strength and torque and give the stem a classic well-balanced look and feel. Bevelled edges and the tapered body profile give the stem a classic yet unique look. Corey Martinez tested and approved.
DEITY Compound V2 Pedals
$59.99
These entry level nylon composite pedals are an amazing value with unbelievable performance! Built on the same internal system as our retired Decoy pedal and all new Black Kat pedal, the COMPOUND pedals are full serviceable with sealed bearings and cromo pins and spindle. These pedals peg you to challenge them as they continue to perform hassle free for as long as you let them. Not only will they surprise you with durability, but the colored composite pedal body never fades or shows wear as the color runs throughout to deliver a fresh pedal day in and day out. Give the value packed COMPOUND pedal a try and see why you’ll be back to try out our top tier acclaimed DEITY pedal designs, the BLACK KAT, BLADERUNNER, and TMAC!
Eclat Rim Strip
$9.99
Conventional rim tape sometimes doesn’t always cover up spoke holes the entire way, but with éclat’s new extra wide rim tape, the days of pinch flats from sharpened spoke holes are gone. Éclat’s extra wide rim tape was designed to work exclusively with éclat’s Bondi rim but is well suited to any wider 20? rim, constructed of durable rubber with a nylon inner core.
Eclat Pulsar Grips
$19.99
The Pulsar grip is the end result of our quest for the “perfect” grip. This flangeless mushroom style grip is made in the USA by ODI grips using their super soft rubber compound which combined with our specially designed rib profile, makes for our best feeling and longest lasting grip yet. Includes our new USA made eclat nylon barends.
Eclat Slot Machine Pegs - 4.13
$24.99
Simple but effective. The éclat Slot Machine peg may look simple, but then appearances can be deceiving. This peg has a butted 4140 crmo construction providing immense strength, whilst the machined slots and holes combined with liquid heat-treatment keep it super light.
Eclat Slash Nylon Pedal
$34.99
Our riders asked for a low profile, micro style pedal using the loose ball bearing system and integrating a crmo spindle, we scratched our heads and shortly after delivered the Slash nylon pedal. It’s somewhere close to perfect in size, features a lightweight design and has a nice knurled top surface.
Eclat Contra Pedal - Black
$35.99
When it came to designing the Contra pedal, we were having trouble keeping the pedal profile thin while not sacrificing the strength of the spindle. Instead of taking an ‘off-the-shelf’ spindle, we went and developed our own custom option which uses a smaller caged bearing, but stays thicker closer to the crank arm where you need the strength the most. With removable pins on one side of the pedal, you can keep one side nice and grippy, and one side for grinding on. You can also put the steel pins in after the moulded pins have been worn down to give more life to your pedal. The end result is a super low profile pedal, with an axle built to withstand the force of today’s toughest riding.
Eclat Plaza Pedal - Gum
$35.99
We quickly realized that pedals don’t need to remain small and as long as the weight is right the pedal can easily be larger in size. The Plaza has quickly become a favorite of the pros and many struggle with the idea of going back to a smaller pedal. The Plaza features a knurled top surface and crmo spindle to give it a longer lifespan. Give it try, you might never go back.
Eclat Venom Peg 4.5
$35.99
The Venom peg uses a two-piece steel/plastic design based on the ‘classic sleeve’ system. Our aim was to create a plastic sleeve peg with a diameter similar to a standard steel peg. This lead us down the route of a steel/plastic design with a slim crmo inner peg wrapped in a generous thickness of our specially developed (for the Team Peg) hard wearing nylon compound. When testing the prototypes we saw these pegs going beyond 6 months of hard riding!
Eclat Decoder 80 Tire (Low Pressure)
$39.99
The Decoder Tire the latest addition to the eclat tire family. With a tread pattern based on our super popular Fireball tire, the Decoder uses a much lower profile design with super fine knurling making it fast, grippy and incredibly tough. This lightweight street/ramp tire features a specially designed grind resistant sidewall protection and is available in two casing options, a 60tpi (80psi max) version with a rubber sidewall layer for STREET, and a lighter weight 120tpi (120psi max) version for COMPETITION. Available in 2.3? (56.5mm), and 2.4? (60mm) options.
Eclat Mirage Tire - Wire Bead
$48.99 - $54.99
The Mirage tire might just be the most advanced tire we’ve ever designed. Built on the premise of a super light tire that was strong enough for the toughest street riders on the team, the Mirage uses a high-performance 120tpi casing and a specially designed dual compound tread that is smooth in the center, but with plenty of grip on the outer tread for traction and control whilst cornering and carving. The Mirage was also designed with street riders in mind and uses a full bead-to-bead “Silkshiled” protection layer and a special outer ridge which acts like a bumper and prevents the sidewall getting damaged during grinds. Rated up to 110psi, the Mirage tire is perfect for street riders and ramp riders alike, and is one of the lightest tires on the market, but sacrifices none of the strength and quality that a lot of lighter tires give up in exchange for weight savings. Made by Maxxis tires. Weight: 2.25" wire bead 20oz / 566g 2.35" wire bead 21.7oz / 615g
Eclat Decoder 120 Tire (High Pressure)
$49.99 - $54.99
The Decoder Tire the latest addition to the eclat tire family. With a tread pattern based on our super popular Fireball tire, the Decoder uses a much lower profile design with super fine knurling making it fast, grippy and incredibly tough. This lightweight street/ramp tire features a specially designed grind resistant sidewall protection and is available in two casing options, a 60tpi (80psi max) version with a rubber sidewall layer for STREET, and a lighter weight 120tpi (120psi max) version for COMPETITION. Available in 2.3? (56.5mm), and 2.4? (60mm) options.
Eclat Onyx Sprocket
$54.99
The Onyx is a super tough sprocket which uses cold-forging technology to help radically increase strength over a traditional CNC machined sprocket, whilst maintaining a more affordable price tag. This sprocket incorporates a double-sided design, allowing you to change up the look of your bike without having to spend a dime.
Eclat Seeker Pedal - Black
$64.99
The Seeker Pedal was born out of desire and need. Eclat PRO riders like Devon Smillie and Shane Weston asked for a pedal with a larger platform than most, but with a slightly thinner profile. By using regular unsealed bearings you are limited with how thin you can actually make the pedal body without the bearing becoming too small in size, and in return, the axle gets thinner and weaker. To combat this issue we decided to take the battle-proven dual bearing and bushing system that we used in the legendary Surge alloy pedal and apply it to a Nylon fibreglass body. The end result is a pedal body that is not only thinner in profile than any of our other pedals, but also completely flat, without any kind of bump or raised section. Combined with a larger overall surface area, a dual concave design, and a micro-knurled surface – this makes for one of our best feeling and most supportive pedals to date. A larger pedal gives the foot more support, especially on tricks where your feet come off (i.e. tailwhips) and also on hard landings since the load is more spread out and evenly distributed. Using twin sealed bearings and a bushing for extra support, the Seeker pedal’s design allowed us to enlarge the size of the axle and make it stronger than your typical unsealed pedal, and also much smoother and longer-lasting. After a year of testing and development from the team, we couldn’t be more proud to see these hit shops. If you’re looking for one of the best feeling pedals on the market, the Seeker pedal is available now in Black, Burgundy and Army Green, with replacement pedal bodies and rebuild kits also available from your nearest eclat dealer. Go treat your feet today…
Eclat Vent Sprocket
$74.99
The Vent is a simple and smooth looking sprocket, incorporating a unique three-spoke design. Each of the spokes is internally machined to reduce weight without compromising strength.
Eclat Elevate Guard Sprocket
$89.99
The Elevate Guard Sprocket is our new “team designed” solid sprocket, which uses the same VIPER Nylon Fiberglass bash guard and a patented interface that made our AK guard such a successful and game-changing product. For riders preferring the look of a solid sprocket but with the advantages of the Nylon guard, the Elevate is available in both 25t and 28t options. One of the major design elements that have made this guard such a trustworthy and robust product, is the way that the Nylon guard is attached to the sprocket. Instead of sitting on the surface of the alloy sprocket, the Nylon guard is sunken INTO the structure of the sprocket and supported all the way around so that the bolt holes on the guard do not take all the impact. The high-impact, low-friction material of the guard allows you to grind and slide on the sprocket in ways that a standard alloy guard wouldn’t let you – this also opens up the possibility of a whole new world of grind combinations.
Eclat Surge Alloy Pedal - Black
$154.99
Built around a fully sealed bushing system to save weight, the Surge alloy pedal is constructed of 6066 CNC alloy, it features a low-profile slender design and cro-mo spindle. Built to last, the Surge pedal set comes complete with a set of replaceable pins and nylon impact ring. Lightweight and uncomplicated, the Surge pedals are a cut above the rest.
FSA Impact Headset
$49.99
- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race - Impact: 45x45 degree Campagnolo Integrated - S.H.I.S.: IS42/28.6|IS42/30 - Stack: 8mm/1mm - Color: Black, Orange, Red - Weight: 68g
Fitbikeco FAF Tire
$49.99
The FAF tire features a street design directional tread pattern with micro-knurling for extra traction. Puncture Resistant Kevlar Belt Tear Resistant Silkworm Casing Micro-knurled sidewall for durability SPECS 20?x2.3? Inflated Width: 2.2? (56mm) Inflated Diameter: 20.5? (520mm) Max Pressure: 110 PSI Weight: 25.5 oz (1.59lbs) 20?x2.4? Inflated Width: 2.44? (62mm) Inflated Diameter: 20.9? (530mm) Max Pressure: 110 PSI Weight: 25.6 oz (1.6 lbs)
Fitbikeco Jordan Hango Stem - Polished
$100.00
The Canadian Street Beast now has his very own Signature Stem from Fit. Made in the USA. Specifications: TYPE: Top Load REACH: 48mm RISE: 28.5mm CLAMPING DIAMETER: 22.2mm WEIGHT: 341g
KMC Z410 BMX Chain
$19.99
Z410 is a basic, affordable replacement 1/8th chain. Available in an array of colors for adding a touch of style to your bike. - For non-derailleur bikes: BMX, cruisers, etc. - Bushingless design - Includes KMC Master Link - Links (links): 112 - Width: 9.3mm - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chain Connection Type: Reusable Master Link - Half Link Chain: No - Weight: 399g
MacNeil Network Cassette Hub
$194.99 $214.99 9% Off
Here we have the MacNeil "Network" Cassette Hub - Female. You will get a high quality Cassette hub no matter if male or female version. The SDS system of the MacNeil "Network" Cassette Hub let you easily switch the driver between RHD and LHD and it has 3 sealed bearings in the driver which makes this great hub longlasting and ready for hard street riding. - 36 hole only - High-quality Japanese body bearings - One-piece 9T driver with 3 Japanese bearings - Switch Drive System (SDS) allows for easy switch between LHD and RHD - Dialed 3-pawl engagement system - Available with female axle or traditional straight axle system - Aluminum hardware - Weight: 470 grams - Colors: Polished
Merritt BMX Cross-Check Grips
$19.99
Charlie Crumlish signature grips, soft kraton rubber with a flangeless design that’s long and thin. Plastic bar ends included. 160mm long
Merritt BMX Tension Front Hub Guard
$19.99
Universal plastic hub guard that easily attaches to the spokes with a simple spring clip that keeps the guard under tension and in place. The tension system is away from the grind side, so it isn’t affected as the guard wears down. Works on most front hubs and some rear hubs.
Merritt BMX Brian Foster FT1 Tire
$55.00
Trails nowadays are nothing like they used to be, very little pedaling and/or braking and the dirt is usually rock hard, it doesn’t make sense to mimic MX tires (that have to accelerate, brake and turn in soft dirt) with big knobs anymore and BF rides a mix of everything, so his tire needs to work well on everything. That lead to giving the FT1 a relatively smooth center section, to make the tire fast. Turning is when an increase in grip (instead of outright speed) is needed, lean the bike over in a turn and the micro-knobs come into play. The micro-knobs provide a perfect balance of surface area, stability and space in between for when the dirt might be a little soft still. The micro-knobs actually stick up above the main surface a super small amount, this allows them to sink into that slightly soft dirt and give an increase in surface area contact, but the amount they are raised doesn’t negatively affect stability or grip on hard surfaces. At the edges of the tread pattern are smooth tread blocks that help protect the sidewall on ramps and street. 20? x 2.25? and 20? x 2.35?
Page 1 of 2 Next page