29-Inch

The latest generation of the World-Cup-proven intermediate tire, the Butcher BLCK DMND 2Bliss Ready, receives sawtooth faces on the tread blocks to increase stability under load and to provide additional biting edges. This, in turn, improves rolling speed as well as control under hard braking and cornering. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, gripping the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. The new BLCK DMND casing strikes the balance between suppleness and extreme pinch flat protection. In order to descend all-out, you need as much traction as possible, the tire needs to conform and hold on to the ground, but also protect from pinch flats. In order for this to happen, only the treaded part of the tire needs to conform, grip, and dampen, while the tire base offers stability and support for steering inputs. - Folding bead - 2Bliss Ready - Compound: GRIPTON - Pressure: 20 – 40psi - Casing: Center Overlap, Flip Up, and Rubber Apex

The Butcher GRID TRAIL 2Bliss Ready T7 features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped, the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. Building on this solid base, the T7 GRIPTON compound enhances rolling speed while still providing tons of grip. - Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7

The Butcher GRID GRAVITY 2Bliss Ready T9 is the perfect choice for trail and gravity riders. Ramped and siped center tread blocks provide strong traction and accurate steering, while the shoulder knobs offer a continuous biting edge for railing through fast corners. The GRID GRAVITY casing compliments gravity riding with an all-new 2-ply construction for cornering stability and flat protection. Building on this solid base, the high-dampening T9 GRIPTON compound rebounds slowly to grip and stick to the ground for total traction and control. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40 approximate weight 1350g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T9.

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base, the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60tpi light yet tough with additional bead to bead protection for exceptional durability, sidewall stiffness, and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T9 - 29 x 2.3", psi 25-50, approximate weight 975g - 29 x 2.6", psi 20-40, approximate weight 1050g

The Eliminator GRID TRAIL 2Bliss Ready tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. - Casing: Additional bead-to-bead protection for exceptional durability, plus sidewall stiffness stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.30: PSI 25-50, approximate weight: 890g - 29 x 2.60: PSI 20-40, approximate weight: 930g

The Ground Control Sport uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. - Casing: 60 TPI - Bead: Wire - 29 x 2.35", PSI 25-50, approximate weight 890g

The Hardrock'R is a long lasting tire with an aggressive, yet smooth rolling, tread with multi-directional knobs that are sure to improve traction and cornering over mixed terrain. And with the added benefit of Flak Jacket flat protection, you'll be sure to hit it all with confidence and control. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 29 x 2.0", PSI 35-65, approximate weight 1000g

The Hillbilly BLCK DMND 2Bliss Ready tire is a perfect option for front tire use when the course features intermediate to soft terrain. When the soil is changing from hard to soft, the small blocks penetrate the ground surface and better connect you to the trail. Small surface center knobs also increase the load on the ground and help surface penetration, while the shoulder knob row provides support in fast turns on all surfaces. Our GRIPTON compound, meanwhile, improves high frequency damping, better attaching the tire to the ground over small bumps and rough sections alike. This means that the low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy to be absorbed and keeping your speeds high. The new BLCK DMND casing strikes the balance between suppleness and extreme pinch flat protection. In order to descend all-out, you need as much traction as possible—the tire needs to conform and hold on to the ground, but also protect from pinch flats. In order for this to happen, only the treaded part of the tire needs to conform, grip, and dampen, while the tire base offers stability and support for steering inputs. - Casing: Center Overlap, Flip Up and Rubber Apex - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.3", psi 25-50 - 29 x 2.6", psi 20-40

- The favourite among downhill and enduro experts. - The perfect choice for virtually any track. - Intermediate tread: maximum brake traction and corner grip even on extremely muddy terrain thanks to strong shoulder studs and the aggressive, open tread design.

The Ultimate Gravity tire! The iconic Magic Mary with radial carcass provides more contact area and even more grip. - Radial carcass allows for a larger contact patch and conforms to terrain, yielding more grip, more comfort, and more control - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip even in muddy terrain - Equipped with V-Groves specially developed for Magic Mary, every stud can bite into the ground for even more grip - Angled studs in the middle of the tread optimize the rolling characteristics - TRAIL PRO version (Evo line) - Addix Ultra Soft compound - E-bike: E-50 - 1220g

The Aspen is a lightweight XC tire that is designed to roll fast and still provide enough traction to keep you going when the trail gets rough. - Low profile tread design rolls fast and still delivers grip for climbing and braking - Aggressive side lugs dig into soft terrain to provide additional cornering traction - Intended use: hardpack, loose over hard, medium - MaxxSpeed features a high-silica content compound that reduces rolling resistance while also enhancing wet traction - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Team-spec tires feature a lighter, faster, and more supple 170 TPI casing for the lowest weight possible, with a reduction in durability

High-volume casing, low-profile tread - Aggressive side knobs - Dual Compound - Lightweight XC race tire - Race-inspired low profile design Maxxis has done it again with its latest XC race tire. The new Maxxis Aspen pushes the limits of a lightweight XC tire designed to have minimal rolling resistance. The Aspen is designed with a high-volume casing to smooth out the roughest roots and rocks, while the dual compounds give optimal traction in the corners. So, if crossing the finish line first is your top priority, then the Aspen was designed for you.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The Maxxis Forekaster features a spiky, well-spaced tread pattern that is ideal for XC racing or light duty trail riding in loose or wet conditions during the spring and fall. Use as a front paired with an Aspen or Ikon rear for an “aggressive” XC setup.

The second generation of the legendary High Roller - Easily clears debris - Open tread design - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims An open and aggressive tread design gives the High Roller II excellent soil penetration and mud-clearing ability. A square profile provides a solid, consistent feel across the knobs. Modified knobs on the shoulder and center improve braking performance and traction on hard surfaces. An excellent choice for technical, loose terrain.

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

Tough enough for the meanest streets - Durable enough for urban assault, park riding, commuting, cargo bikes, etc. - Grooved slick tread design - Wrap-around tread pattern As the original urban assault tire, we designed the Hookworm to take the abuses of the most aggressive street riders. Bead-to-bead tread provides durability and traction whether you're dropping staircases, grinding rails, or riding in your local skate park.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving TOTAL CONFIDENCE for All Riders. Tire Widths: 2.1"-2.6" Inner Rim Width: 22mm-35mm Includes: (1) CushCore tire insert, (1) 44mm CushCore presta air valve, valve core tool, installation instructions, and rim stickers.

Continental’s Mountain King II 29 reigns over wet and dry trails alike thanks to its open lug tread. This, combined with its large volume and ramped side lugs, ensures great cornering grip and excellent rolling efficiency. It's the ideal tire for epic off-road adventures. Plus, Conti's ProTection casing helps prevent punctures and allows going tubeless.

For ultimate XC speed on hardpack, Air Trak delivers. Its fast-rolling tread cluster and high-speed center T5 compound ensure unmatched straight-line velocity, while grippier T7 compound on the sides delivers traction to maintain cornering speed. Our lightest Flex Lite casing keeps the tire at just 575 grams, offering lightning-fast acceleration and top climbing performance. When sheer speed matters, Air Trak is the perfect choice. - Use - XC racing. - Terrain - Mountain - Hardpack. - Casing - 60TPI Flex Lite. - Compounds - GRIPTON T5/T7. - Type - Tubeless. - Wheel Pairing Recommendation - Roval Control World Cup and Roval Control SL.

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID 2Bliss Ready, receives sawtooth faces on the tread blocks to increase stability under load and provide additional biting edges. This, in turn, improves rolling speed as well as control under hard braking and cornering. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. The T7 compound offers a perfect blend of grip and long-lasting performance. Once you ride the Butcher, you will never want another tire for your gravity excursions. We recommend GRID tires for anyone seeking the utmost in flat and sidewall protection or additional stability. - 29 x 2.3", psi 25-50, approximate weight 890g. - 29 x 2.6", psi 20-40, approximate weight 965g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60tpi, lightweight with sidewall protection for exceptional durability and sidewall stability. - Compound: GRIPTON T7.

The world’s fastest riders are always hungry for more traction. So when Loïc Bruni, Finn Iles, and Chris Grice from the Gravity team reached out to us to develop a mountain bike tire to tame World Cup Downhill tracks, we cooked up something that will satisfy even the most aggressive appetites. We completely redesigned the Cannibal tread pattern, integrating our super-sticky GRIPTON T9 compound with a high-volume casing that brings superior control to any terrain. Staggered shoulder blocks maximize cornering stability, and large center braking blocks bite aggressively into the ground. Engineered to the design specifications of our riders, the Cannibal balances weight and durability with GRID Gravity casing for Enduro, Downhill, and Park riding. The Cannibal delivers the unbeatable combination of grip, confidence, and control to devour any track. - High-volume casing and staggered shoulder blocks for predictable high-speed cornering. - Re-designed center knobs and siping form strong surface connections. - Wide braking edges and massive center blocks cut in for maximum deceleration. - GRIPTON T9 compound reduces terrain-induced chatter, enhancing confidence at warp speeds. - Compliant and adaptable GRID GRAVITY 2-ply casing construction is ideal for Enduro, Park, and Downhill riding. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures.

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40, approximate weight 1400g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T7/T9.